svshaw82
NAXJA Forum User
- Location
- Escondido CA
Hey guys, got myself into a bit of a snag.
First off, I bought myself the Comp Cams 68-232-4 camshaft. Then since I found out Comp doesnt have matching springs that fit out 4.0 head, I found on jeepforum.com an article that someone had said they were running the same cam with a set of Sealed Power SLP-VS-1456 springs.
They were affordable for me so I bought a set. Now that my cam finally came, I started looking into assembly. Saw a spec on the springs that shows installed Height 1.815 in, and Open Height 1.500 in. That only gives me .315 in lift, and the cam I have is .476 in lift!
Can any tell me where I can find a set of springs that will work for this cam, without breaking my bank? Thanks in advance!
First off, I bought myself the Comp Cams 68-232-4 camshaft. Then since I found out Comp doesnt have matching springs that fit out 4.0 head, I found on jeepforum.com an article that someone had said they were running the same cam with a set of Sealed Power SLP-VS-1456 springs.
They were affordable for me so I bought a set. Now that my cam finally came, I started looking into assembly. Saw a spec on the springs that shows installed Height 1.815 in, and Open Height 1.500 in. That only gives me .315 in lift, and the cam I have is .476 in lift!
Can any tell me where I can find a set of springs that will work for this cam, without breaking my bank? Thanks in advance!