Muad'Dib
NAXJA Forum User
- Location
- Bend, Oregon
Last year when i didnt have time to work on my Jeep ('90 RENIX) i took it to the dealership to fix a high idle. They said it was vacuum lines, fixed it, and i was on my way. Lately i have been having an "low" idle problem when the engine is cold. As part of my diagnostics, i have been trying to find / check / replace all the vacuum lines that are disconnected (some are very hard to find) etc.
Well last night i was doing this and i found two on the passengers side that were not connected to anything. I dont know what these would go to, or maybe they go together. So i figured i would post here.
One of them is blue, and i believe (i could be wrong) that it is part of the 4wd vacuum system. Its located directly below the coolant bootle on the firewall. Here are some pictures:
Pulled up to show the bottom:
http://i13.tinypic.com/628bvdc.jpg
Laying down: You can barely see its "UFO" head:
http://i11.tinypic.com/4q7qvcg.jpg
Shown with a magnetic pic up. The head of the magnet is where i found it sitting between a yellow and red (I think) vacuum lines:
http://i16.tinypic.com/61yweo9.jpg
Now here is the other one. Its just a plain black one that i believe runs to that round canister that sits behind the passengers side front bumper.
Pulled out to show it a little better:
http://i13.tinypic.com/503y25c.jpg
http://i9.tinypic.com/4uvemj4.jpg
Part of where it is ran. Big picture, but i wanted to give you the idea of where it is ran. Its to the left of the relay. Its got a zip tie around it and something else: Im pretty sure it runs to that round canister behind the bumper. But im not 100% certain.
http://i9.tinypic.com/6h3gubm.jpg
I hope these pictures help. I just would like to know where these are supposed to be plugged into. Maybe im thinking too hard and they just go together, but i want to be sure.
Oh and just in case you want to know what all that wiring is for:
http://i13.tinypic.com/630v4fk.jpg
Thanks guys for all your help!!
Well last night i was doing this and i found two on the passengers side that were not connected to anything. I dont know what these would go to, or maybe they go together. So i figured i would post here.
One of them is blue, and i believe (i could be wrong) that it is part of the 4wd vacuum system. Its located directly below the coolant bootle on the firewall. Here are some pictures:
Pulled up to show the bottom:
http://i13.tinypic.com/628bvdc.jpg
Laying down: You can barely see its "UFO" head:
http://i11.tinypic.com/4q7qvcg.jpg
Shown with a magnetic pic up. The head of the magnet is where i found it sitting between a yellow and red (I think) vacuum lines:
http://i16.tinypic.com/61yweo9.jpg
Now here is the other one. Its just a plain black one that i believe runs to that round canister that sits behind the passengers side front bumper.
Pulled out to show it a little better:
http://i13.tinypic.com/503y25c.jpg
http://i9.tinypic.com/4uvemj4.jpg
Part of where it is ran. Big picture, but i wanted to give you the idea of where it is ran. Its to the left of the relay. Its got a zip tie around it and something else: Im pretty sure it runs to that round canister behind the bumper. But im not 100% certain.
http://i9.tinypic.com/6h3gubm.jpg
I hope these pictures help. I just would like to know where these are supposed to be plugged into. Maybe im thinking too hard and they just go together, but i want to be sure.
Oh and just in case you want to know what all that wiring is for:
http://i13.tinypic.com/630v4fk.jpg
Thanks guys for all your help!!