MG2000XJ
NAXJA Forum User
- Location
- Salt Lake City, UT
Im looking for upgrades for my battery terminals in my new jeep. This has come about while starting work on my stereo.
I need room for my amp cable as well as spots for the stock cables and aftermarket accessories.
There are terminals like these, mainly used for car audio, which do not have a post or wire terminal for the stock cables and wires for accessories
http://www.sonicelectronix.com/item_17809_Kicker+CBP+-+09CBP.html
There are also the standard brass terminals with a post like these, which would give me no other options other than ring terminals on the ends of cables/wires. Im not sure there is enought room on the post for say a 0awg cable plus others
http://www.delcity.net/store/Wingnut-!-Brass-Battery-Terminals/p_14380.a_1
Quadratec also carries these made for the JK which have multiple terminals for multiple gauge cables and accessories. All of them would still need ring terminals but they wouldnt all be stacked up on one another. Would these even fit a standard battery post?
http://www.quadratec.com/products/17004_9001.htm
Here is a diagram detailing the Quadratec terminals and what each terminal is used for
http://home.comcast.net/~kingslea1/Jeep/BatTerm.pdf
Something like the ones Quadratec sells is probably what Im looking for but I thought Id ask what you guys thought and see what you guys use.
Also what type of crimping pliers do you guys use for heavy gauge cable. I have the standard small wire crimps but what would I use for crimping ring terminals on alternator cables or amp cables.
Thanks for the help:cheers:
I need room for my amp cable as well as spots for the stock cables and aftermarket accessories.
There are terminals like these, mainly used for car audio, which do not have a post or wire terminal for the stock cables and wires for accessories
http://www.sonicelectronix.com/item_17809_Kicker+CBP+-+09CBP.html
There are also the standard brass terminals with a post like these, which would give me no other options other than ring terminals on the ends of cables/wires. Im not sure there is enought room on the post for say a 0awg cable plus others
http://www.delcity.net/store/Wingnut-!-Brass-Battery-Terminals/p_14380.a_1
Quadratec also carries these made for the JK which have multiple terminals for multiple gauge cables and accessories. All of them would still need ring terminals but they wouldnt all be stacked up on one another. Would these even fit a standard battery post?
http://www.quadratec.com/products/17004_9001.htm
Here is a diagram detailing the Quadratec terminals and what each terminal is used for
http://home.comcast.net/~kingslea1/Jeep/BatTerm.pdf
Something like the ones Quadratec sells is probably what Im looking for but I thought Id ask what you guys thought and see what you guys use.
Also what type of crimping pliers do you guys use for heavy gauge cable. I have the standard small wire crimps but what would I use for crimping ring terminals on alternator cables or amp cables.
Thanks for the help:cheers: