Super Phat

PhatXJ said:
Those trails are in the same state as you, but a looooooooooong way away ;)
Duhh!! :rolleyes: I knew they were in Idaho just not where. I wish there were trails like that up here. Next year I'll be in Moscow so thats an hour or so closer to Boise. :confused:
 
Phat, just take a pry bar and unload that sh*t. :D

CW, I though there were some pretty good tails up your way. Have they got them all closed?

Lincoln
 
They closed all the roads in a huge chunk of national forest, and every trail that I used to run that I can still access has a sign that says no motor vehicles. :( You just have to be creative, and consider anything wide enough a "trail" :D
 
Lincoln said:
Don't forget lazy. :D

Didn't you read this above?

Takes about 4hours to pull mine and I need to figure out what I'm going to do before I pull it. You probably have yours all waxed up so it will just slide right out. :D
 
Lincoln said:
Didn't you read this above?

Takes about 4hours to pull mine and I need to figure out what I'm going to do before I pull it. You probably have yours all waxed up so it will just slide right out. :D

thefinger.gif


Tell me what you need again and I'll see if I can get it with my box in there, punk :D
 
I actually gave up on your sorry butt. Sent Mr. Hinkley an e-mail. I'll let you know.

Why don't you just figure out a way to hook your strap to it and tie the other end to a tree. That would be cool.

:moon:
 
Lincoln said:
I actually gave up on your sorry butt. Sent Mr. Hinkley an e-mail. I'll let you know.

Why don't you just figure out a way to hook your strap to it and tie the other end to a tree. That would be cool.

:moon:

Good, because I wasn't going to go out and measure anyway :D

I tried the tree thing, but I anchored my box down so good, it just uprooted the tree
thefinger.gif
 
I can't believe I stopped reading about dry cut chop saws for a lame azz reply like that.
thefinger.gif


FIND A BIGGER TREE AND GET A LONGER RUN!

Jes, Not yet. :D
 
It was the best I could do Lincoln Logs :D

If we get tossed in the bin for these replies, I'd be surprised ;)

I've decided I'm going to sell the Honda and get another XJ for a daily, this snow has me wigged out. Bald tires on a Honda and snow doesn't sound like fun. Maybe a ZJ? Naww.... coils all the way around blows balls.

:D
 
That's better cuttie boy.

I'm thinking the bald tires on the pickup won't be much fun either. To top it off whoever had it before me disabled the ABS. I guess I'm going to have to figure that out also.

Oh well, back to saw shopping. I need to cut some sh*t and dad say's I can't borrow his anymore unless I'm building stuff for him. Something about two sets of brushes.

I can't believe him. I bought him that thing for X-mas and let him keep it a month. What more does he want. :D

Lincoln
 
Lincoln said:
That's better cuttie boy.

I'm thinking the bald tires on the pickup won't be much fun either. To top it off whoever had it before me disabled the ABS. I guess I'm going to have to figure that out also.

Oh well, back to saw shopping. I need to cut some sh*t and dad say's I can't borrow his anymore unless I'm building stuff for him. Something about two sets of brushes.

I can't believe him. I bought him that thing for X-mas and let him keep it a month. What more does he want. :D

Lincoln


WTF do you need to cut down? I thought you lived on the North End :D

Could you imagine if you did live over there and one day you just went outside and started hacking shit down :D :D
 
I"m talking metal.

No, I live south of town. From Edwards go about 2.5 miles south and 3/4 west. No one says much around here. I cut down seven 12' Junipers and topped about 15' off my fruit trees.

That would be a neat thing to do on Halloween. Take a chain saw with the chain removed and go down to yuppieville (northend) and go to work. Then when the cops showed up, "Just kidding". You do it first.

You watch out Jes, we'll start involving you. :D

Lincoln
 
Lincoln said:

Hey,

My eight year old son, Hunter, wants to know why that guy has his hands up for.

Keep that **** for por, please.

Low lifes! :D

Like Jes said, you guys need a room!

Dave can't you just measure stuff like he wanted? He just wanted to know if that big thing would fit or not.

:D

hinkley
 
Phat started it. :bawl: How many kids do you have Mark. I though your son was older than that. Just tell him that Dave and I are arguing on who is #1.

Mark, have you ever used one of those carbide metal saws?

Won't fit Dave.

Lincoln
 
Lincoln said:

Mark, have you ever used one of those carbide metal saws?

Lincoln

No, they scare me.

I would hate to see it jam! :eek:

I use a cold saw, slow "milling type" cutting.

big bucks though.

mark

ps I have one kid. Likes to read this junk sometimes. Anyhow I knew it was all dave's fault. :D
 
What is it that scares you about them? Using carbide is pretty common around here to cut aluminum truck frames and while building boats, but I've never thought about it for steel. I do refuse to use a worm drive skill while cutting frames though. I've seen them kick back and launch accross the room. The cheap ones just grab and stop.
 
Back
Top