blondejoncherokee
NAXJA Member
- Location
- sacramento
Sent from my iPhone using Tapatalk Pro
stroker issues- wideband reads somewhat lean but exhaust is super rich
- Thread starter blondejoncherokee
- Start date
Sent from my iPhone using Tapatalk Pro
blondejoncherokee
NAXJA Member
- Location
- sacramento
So maybe its not as far off as we think at this point. Ugh. Its like im chasing my tail.
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
What does your wideband read at idle and low load cruise? Should be ~14.7.
I don't understand how oil would be getting into your gas as you mentioned. Do you mean that gas is getting into your oil?
I don't understand how oil would be getting into your gas as you mentioned. Do you mean that gas is getting into your oil?
blondejoncherokee
NAXJA Member
- Location
- sacramento
Sorry I havent been sleeping enough - yes that is what I meant. Not a ton of gas in the oil though. Could be from Break in.
blondejoncherokee
NAXJA Member
- Location
- sacramento
SO it seems like the tech misinterpreted CO2 for CO, so when my buddy said hey my friend has 13% CO he meant to say 13% CO2 to his master tech at his shop, when his tech heard 13% CO he freaked out...
SO I think this thing is running ok finally. It runs decent.
The issue I am so stressed about overfueling is that we had to pull the motor recently after a year of driving (900 miles only) the machine noticed a ton of fuel in the oil and said it was just starting to take out the rings. SO with the motor back in I am extra paranoid about running too rich, but this seems about right.
SO I think this thing is running ok finally. It runs decent.
The issue I am so stressed about overfueling is that we had to pull the motor recently after a year of driving (900 miles only) the machine noticed a ton of fuel in the oil and said it was just starting to take out the rings. SO with the motor back in I am extra paranoid about running too rich, but this seems about right.
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
With the amount of money you have in it, I'd HIGHLY recommend getting it tuned on a dyno. Since you have the late model ECU, tuning is entirely possible. Flyin Ryan is the man. I just wish I knew that he was out there when I had the turbo.
blondejoncherokee
NAXJA Member
- Location
- sacramento
yeah he is tuning it right now via email. I could go find a dyno somewhere I suppose and data log that way.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Let's hope you see improvement. Your data log is a little hard to read but I don't like "what I think" I see. I didn't do any ECU tuning with mine but rather looked at the numbers and made a SWAG decision on some injectors. The final results were almost outstanding!