So Cal desert rats

[scottmcneal]

I have heard of folks using that cleaner that kills them.See if you can find anything on here about them an read i guess.The cleaner is that stuff that makes it smoke if you pour it down the intake.Can't think of it's name darn it.

 

[XJrealm]

I have heard of folks using that cleaner that kills them.See if you can find anything on here about them an read i guess.The cleaner is that stuff that makes it smoke if you pour it down the intake.Can't think of it's name darn it.

Seafoam......I have heard of it messing up your plugs but not the O2 sensor. I used the cleaner on mine and then changed the plugs after.

 

[scottmcneal]

Yea thats it, thank you for helping the old guy.I hear it can screw with them.Don't know if it is true or not.Guess we could read about to try to help you out tone.

 

[TheCaptain]

Picking up a new project tomorrow (not jeep)... pics and more info after i get it.

 

[crash02]

I sputtered last night when I started driving home from work, like bogged out and almost died then I pumped the pedal and it caught and started going again... yea it has 2 O2 sensors, but they are both fairly new and the scan tool said O2 high voltage whatever that means? but Im not sure what can be causing them to go bad that quick 1 is less then a year old and the other is about 1 1/2 years old.. maybe the cat is clogged and causing them to get F'ed up?

I thought I read somewhere(I know,I know) that the 2 02 sensors are different and need to be installed in the correct location(I.e. before cat and after cat. Different range readings). The higher the voltage reading at the 02 sensor the richer the condition.good luck tone and hope to wheel with all you guys soon.

 

[scottmcneal]

I thought I read somewhere(I know,I know) that the 2 02 sensors are different and need to be installed in the correct location(I.e. before cat and after cat. Different range readings). The higher the voltage reading at the 02 sensor the richer the condition.good luck tone and hope to wheel with all you guys soon.

We got a night run going sept 24th.Try to make that if you can.We plan on meeting at the red earth casino at 4:30-5:00 pm on the 24th.

 

[scottmcneal]

Picking up a new project tomorrow (not jeep)... pics and more info after i get it.

:roflmao:I almost got mine done now. I think i have maybe a couple more mounts to install and then i can start on the wifes jeep.

Did you want to work on yours again? Need to try and get them rails cut and mounted before the night run don't we. I think you can do the tubes now with them long arms and 35's on her.:guitar:. Plus i am taking my jeep this run

 

[TheCaptain]

Yeah I want to try those tubes again, if we can get the rails on before then... But I have to go to a family function this weekend, so unless you have time during the week I'll just go without them. Also want to make sure you are done with yours first.

 

[scottmcneal]

Mine is done, as in running . What i am doing now is just fluff.As you know i talked about doing things this season with it and i got it almost done.I am open all week, day and night.Just let me know when and what an we can get it done.

 

[scottmcneal]

Bill fix your jeep son.Don't sit here reading, go get the part and fix that darn jeep now.

 

[tone]

seriously!

been up for 24hrs now, dentist apt at 10am then sleep the WHOLE day!!! graveyards suck, man Im fkn tired...

 

[scottmcneal]

It does get better.Just don't know when, but when i do find out i'll let you know ok.LOL.

Good part is the dentist, getting the tooth fixed.Sleep is over rated.

 

[scottmcneal]

Tone don't you have the scanner setup on your phone like Aaron 1 showed you?I know the other Aaron got it for his phone after he seen it. I was thinking you did this too.Maybe you can get with him for it and use it while you drive around to see if it shows you what your jeep is doing.I don't know if it will work, but it can't hurt to try and it's free i would think.

 

[TheCaptain]

Tone has the iPhone, i'm not sure if there is a version of the software for that. Last time we ran it he had 4 codes that indicated O2 sensor high voltage. IMHO that is what he needs to figure out first.

How's Monday looking for you scott? want to work on my rails then?

 

[scottmcneal]

Yea that works.I need to go to the home depot to get some wheels for cutting.My garage will be open and clean by then, i got a ton of grinding and welding on the floor.LOL.

 

[TheCaptain]

Yea that works.I need to go to the home depot to get some wheels for cutting.My garage will be open and clean by then, i got a ton of grinding and welding on the floor.LOL.

Just tell me what kind of cutting wheels you want and i will buy them, no need for you to pay for stuff for my jeep. plus i think we went through a few of them cutting my fenders and stuff.

 

[scottmcneal]

Dude no biggie.I'll give you the bill when you get here ok.I just need to grab 5 cutting wheels and i can't think of the size, plus i need to get out of this house for awhile.I only get out to offroad on the weekends, it sucks.
Lets see now, I want a NEW 230 volt plasma and welder.Plus i need that 230 volt air compressor.

Dam i'm thinking outloud again ain't I.LOL

 

[tone]

In the chair right now... Just got numbed up ouch

 

[crash02]

We got a night run going sept 24th.Try to make that if you can.We plan on meeting at the red earth casino at 4:30-5:00 pm on the 24th.

I doubt I will be able to make This one, infact im sure I wont be able too. Thank you for the Invite but I will have to pass on this one. Thank goodness its starting too cool down.

 

[scottmcneal]

In the chair right now... Just got numbed up ouch

:twak: OUCH? WTF dude LOL.I never feel the pain of the needle, they use a wipe first, then wait to give me the needle.:cheers:.I like my guy.

Plus i just remove mine and hand them to them so they can work on them.LOL.