So Cal desert rats

Anyone have pics of the stock t case skid plate installed? I am trying to figure out how it lines up but am not seeing it. I can get one hole on the crossmember and one on the uniframe to line up and that its. Do I need to drill new holes? I did some google searching and pretty much everything was for aftermarket skids. Thanks!
 
Anyone have pics of the stock t case skid plate installed? I am trying to figure out how it lines up but am not seeing it. I can get one hole on the crossmember and one on the uniframe to line up and that its. Do I need to drill new holes? I did some google searching and pretty much everything was for aftermarket skids. Thanks!

Here try this.First couple of post tell you and a pic to show you.Yes it has a DROP on it too.LOL.
http://www.jeepforum.com/forum/f11/factory-231-skid-plate-1094520/
:D
 
Good god, that thing is ugly. Looks more like a rock plow than a skid plate... Get a sheet of 3/16" or 1/4" plate and I'll make you a crossmember/skidplate.
 
Good god, that thing is ugly. Looks more like a rock plow than a skid plate... Get a sheet of 3/16" or 1/4" plate and I'll make you a crossmember/skidplate.

THAT's ! what I was thinking... wait... THAT'S what I DID !!!

BUT !!! it's relatively cheap... which is good for the time being...

If Aaron can come up with some shteeel I can Desertbilly him something...

Curt
 
Hey guys u can't nock what you get for free! Thanks Scott for the link and the skid! My truck would still be stock without the generosity of others! I will make things work for now and make it look pretty later. Besides brad I think I have enough projects lined up for you already! Lol! Al
 
The crossmember is something we can work on though, I want my 1 inch drop and my clearance. Could be a great product to produce too since the only one I have found that does that is rusty's. Sounds like a wide open market!
 
I'll be going up thru the back way,Off hwy 62 thru pioneertown. This makes my run almost all dirt roads.I pop out on hwy 38 i think south of town.I THINK it is south of town.
 
Well i opened up a BIG CAN of WORMS. Cyndee's offroad lights went out awhile ago, so she said maybe we should fix them, SO i said no problem and that when it started.I would post pics but i'm beat and don't feel like taking them. It started with the relay and went from there and NOW there is NO DASH and such in it.For some reason i can't get it to not pop the fuse, till i wire it straight to the battery with no switch or relay.
This is wrong i know but i have chased all the wires and tested them, they are all good and clean.WTF am i missing.Yes i changed the relay twice, same thing.:rattle:
 
The crossmember is something we can work on though, I want my 1 inch drop and my clearance. Could be a great product to produce too since the only one I have found that does that is rusty's. Sounds like a wide open market!

There are a few out there... TnT and Rugged Ridge... you might verify the drop...

Curt
 
I'll be going up thru the back way,Off hwy 62 thru pioneertown. This makes my run almost all dirt roads.I pop out on hwy 38 i think south of town.I THINK it is south of town.

Or the east side of Baldwin Lake... Or on Hwy.18 at Cactus Flats I believe it is.

Curt
 
So right now at 9:05 it is 105 at my place and i need to go out an finish the wifes jeep.I found what caused it to pop the fuse.It wasn't the wiring or the relay.No i won't tell you.
 
scott when you hit rattlesnake cayon make a right (n) about 1/4 mile look for a wash just after the water on the right nice trail but dont take your wifes it wont make it:yap::explosion
 
Thanks max, but mine is down at this time.So this trip is going to be done in the wifes jeep.I still got some more stuff to finish on mine.You still doing your BIG trip?
 
scott when you hit rattlesnake cayon make a right (n) about 1/4 mile look for a wash just after the water on the right nice trail but dont take your wifes it wont make it:yap::explosion

Going down R.S. ?? won't that take him away from Big Bear ??

Curt
 
Back
Top