So Cal desert rats

[scottmcneal]

I think your right max.. But i flex mine more than most...Come to think about it i need to take mine out to flex..

 

[Paul Airhart]

But the rubber is good on the other side, just turn the springs up-side-down.

 

[scottmcneal]

But the rubber is good on the other side, just turn the springs up-side-down.

I would but, i would drag my A$$ on the ground like a dog...:twak:..Plus i think the speed bumps would screw me when i go to the mall

 

[Xtreme XJ]

I am going to post these in case CURT gets on tonite...Curt the bigger ones are 2" and the smaller ones are 1.5"... As you can see, they are bad..We pulled the good side so it would be easier to reinstall them..The other side has little of the rubber left, my axle moves around as i drive down the road...Not good..

So let me know what you have sir...I'll hit you up on the back channel later..

Well the ones I have are 2.5 & 1.75 in. SO !! no luck for yours...
I'm sure there are places on the W. coast, but these guys were cool... in Pa.
The bushings on the site are a little hard to find, but they're there.

You need 2-RB #71 and 2-RB #121 Should be just under $45.00 shipped.
http://stengelbros.3dcartstores.com/Rubber-Bushings_c_268.html

Curt

 

[scottmcneal]

Thank you for the info...I see you even looked up what i needed...I'll give them a call later, should i use your name? Hope they don't yell at me if i do..

 

[squirrel80]

Hey Scott let me know if you need a press to get those out and replace them. I got a 20ton press at the house now and I am alway looking for a reason to use it.

 

[Paul Airhart]

It would beat a vise!

 

[scottmcneal]

Hey Scott let me know if you need a press to get those out and replace them. I got a 20ton press at the house now and I am alway looking for a reason to use it.

Thank you JEFF for the offer..
Money is tight right now...So i don't see this getting done real soon...Between the doctors visits and all the drugs, we are holding back on stuff for the jeeps...But one of these days we will get it all together..LOL

 

[Xtreme XJ]

Thank you JEFF for the offer..
Money is tight right now...So i don't see this getting done real soon...Between the doctors visits and all the drugs, we are holding back on stuff for the jeeps...But one of these days we will get it all together..LOL

I WAS ! going to offer up my 12 ton, but Jeff had to go and up the tonnage...
All I had to do was look at my receipt... mine are the same size.

Also search spring bushings here on & you'll find several posts...

You might see what poly costs ???

Curt

 

[tone]

Sorry about the other day Scott can I shoot it to you Monday?

 

[scottmcneal]

So did anybody else go look at the NUKE LID today? That thing is F ing BIG.. Why yes i took pics,,I can walk under the trailer without bending over..DID i say how F-ING big this thing is?

Sorry this one was from a moving car..LOL..

 

[Paul Airhart]

$hit! That is BIG.

 

[jeeperjohn]

So did anybody else go look at the NUKE LID today? That thing is F ing BIG.. Why yes i took pics,,I can walk under the trailer without bending over..DID i say how F-ING big this thing is?

Sorry this one was from a moving car..LOL..

I saw that thing on the side of the freeway last week. Near lake Elsinore I think.

 

[scottmcneal]

You may have..It only travels 5 MPH top speed, they're going to AZ...It started in Long Beach..They have 2 trucks hooked up to this thing, one pulling and one pushing..
Here is some numbers i found on it..

 

[tone]

Where the hell was that Scott?

 

[scottmcneal]

It was in DHS..They parked it there over night..Tonite it will be up hwy 62 i would think..

 

[Xtreme XJ]

Where the hell was that Scott?

HUH ! Where the hell you been ?? The news is flooded by it's coverage... this is the second one... there was another one a year ago ??

The Yucca grade must be crazy to get up...

Curt

 

[Xtreme XJ]

It was in DHS..They parked it there over night..Tonite it will be up hwy 62 i would think..

Scott... you get that PM ??

Curt

 

[Paul Airhart]

You may have..It only travels 5 MPH top speed, they're going to AZ...It started in Long Beach..They have 2 trucks hooked up to this thing, one pulling and one pushing..
Here is some numbers i found on it..

Anyone want to explain to me why the Fuch it was Made in 'The Republic Of Korea' ? We have a shit load of people out of work, and they are contracting the work to Korea? "To the moon, Alice."

 

[tone]

I don't watch tv guys, last time I watched tv was at scotts house.. Idk what news is unless I see it on my way to work or hear on the radio. Yea I'm THAT guy!