BIGSLVRXJ
NAXJA Forum User
- Location
- Des Moines, Iowa
Well I just went through pretty much redoing my cooling system hoses and I figured since I seem to ask for help here every day I'd try to give something back to the community. These are the Gates part numbers for all the heater hoses for 1987-1990 XJs.
From T to bottom of coolant bottle-This one is only available through Jeep/Chrysler that I'm aware of. The Chrysler part number is 5200 3245-about $10.00
From T to water pump pipe-Gates #18413-$9.99
From T to top pipe of the heater core-this one is just like 3 or 4 inches of mass heater hose(I forget the diameter). If you have the parts store look it up there will be a Gates # but it ends up saying they have like 500 feet of it in stock-like $1.00
From heater valve to side of coolant bottle-Gates #18051-$8.99
From heater valve to thermostat housing-Gates #18072-$13.99
From heater valve to bottom of heater core-Gates #28467-$10.49
Honestly for all this stuff it ended up being about $60 and it was well worth it. I tried cobbling it together with mass heater hose and the Gates plastic elbows and I could tell it wasn't gonna hold, there were crimps and stuff in the hoses once I got done, just not a very clean install. Anyway, hope this helps.
Later,
Collin
From T to bottom of coolant bottle-This one is only available through Jeep/Chrysler that I'm aware of. The Chrysler part number is 5200 3245-about $10.00
From T to water pump pipe-Gates #18413-$9.99
From T to top pipe of the heater core-this one is just like 3 or 4 inches of mass heater hose(I forget the diameter). If you have the parts store look it up there will be a Gates # but it ends up saying they have like 500 feet of it in stock-like $1.00
From heater valve to side of coolant bottle-Gates #18051-$8.99
From heater valve to thermostat housing-Gates #18072-$13.99
From heater valve to bottom of heater core-Gates #28467-$10.49
Honestly for all this stuff it ended up being about $60 and it was well worth it. I tried cobbling it together with mass heater hose and the Gates plastic elbows and I could tell it wasn't gonna hold, there were crimps and stuff in the hoses once I got done, just not a very clean install. Anyway, hope this helps.
Later,
Collin