RE 3.5" Leaf springs

My RE 3.5" leafs brought me to over 5.5 with boomerang shackles. :dunno: Sure you don't just need shackles and call it a day?

Anyway, bump for ya.


I'm on the 3.5" springs with JKS shackles... i have 5.5" RE springs in the front and sit *** low, don't really mind the way it sits so much but i do want more clearance over my newly installed rear bump stops
 
Shacle relocation brackets would bump you up and save a little coin of having to get new rear leafs. Give you a good flex in the rear too.
 
Shacle relocation brackets would bump you up and save a little coin of having to get new rear leafs. Give you a good flex in the rear too.

I'm running these same springs and custom 1.5" lift shacles (homemade by someone else, and not to well I might add) and Rusty's 6.5" in the front. I'm at least an inch and a half low in the rear. Any idea where I might find the relocation bracket you mentioned and what shacles do you recommend?

Bump.
 
I'm running these same springs and custom 1.5" lift shacles (homemade by someone else, and not to well I might add) and Rusty's 6.5" in the front. I'm at least an inch and a half low in the rear. Any idea where I might find the relocation bracket you mentioned and what shacles do you recommend?

Bump.

here's some links for the relocation bracket

http://www.roughcountry.com/jeep_xtras_1117.html


http://www.hdoffroadengineering.com/products/xj-shackle-relocation-kit

i'm running a JKS Shackle
 
Back
Top