RE 1600 tracbar(fixed) adj ucas and lcas

[blondejoncherokee]

RE 1600 trackbar with new jam nut and new heim
(cut off the booger welds and put in new RE heim-25$ heim)
80$

http://i690.photobucket.com/albums/vv267/blondejoncherokee/P1010272.jpg

the following i havent pulled yet, but i will when i install my new long arms:

RE adjustable ucas
100$

RC lowers lengthened to 18.5"
20$ ( i spent 25$ to have new bushings shipped from RC)

 

[Johnnie Walker]

What height lift are those lowers good for?
The track bar is tempting, but I dont want to have to drill the frame mount hole..

 

[Sleeper]

pm about all but the t-bar, and from what i read the lowers are set up for 9''?

 

[blondejoncherokee]

the trackbar comes with a free frame mount as well, already drilled, so you dont have to worry, although its not pictured.
also comes with free bolts for the frame mount and the sleeves for the bolt for the heim(misalignment spacers)

the lcas/ucas are coming off my 5.5" setup, kinda need at least 5.25" to run the 18.5" lowers so your trackbar clears when flexing out alot.
you dont need 9" of lift to clear 18.5" lowers, thats a chart, ive read all those charts, you just need longer uppers and more lift, plus they are trying to prevent your front ds from popping out, well, mine hasnt popped out once in a year of wheeling

i used the longer lowers to help with control arm angles instead of doing drop brackets until i got some long arms(i just got long arms thats why these are going)

ive been running it for a year like that, wheeled a lot last year on that setup.
bumpstops dont hurt anyone either, even though i dont have any
i have the uppers set at 17". no ds vibes, and no need to lengthen ds either.

alot of guys on the threads say you cant run 18.5" lowers on 5.5"
obviously they never tried to do it themselves and just referred to charts they read online.
thats my .02

 

[xtimmax]

Do you still have the trac bar? Are you willing to ship? How much shipped to 92371?

 

[jimmy21669]

What's the condition of the UCA's?

 

[blondejoncherokee]

ucas looked good last time i pulled em off to adjust em about a month ago.
id say great.

 

[blondejoncherokee]

the ucas wont adjsut any further in than 15.75" though

 

[NorCalChris]

darn that sucks. thats all they adjust inward. wont work with my drop brackets then.

 

[matttaylor1976]

pm sent on trackbar, uca's and lca's

 

[blondejoncherokee]

also
have a nice dana 30 front diff skid.
covers the bottom half of the 30 nicely.
40$

 

[GauchoMD]

Any pics of the d30 skid? Willing to ship/How much to 93117? I can paypal you.

 

[Johnnie Walker]

Skid would probably fit in a usps flat rate box..

 

[blondejoncherokee]

i just shipped two bump stops ups
cost me 10.97
this ways more than 2 bumpstops
and itsbigger
plus i hate shipping
and i want local sale only to the seirra chapter....
that being said
25$ for shipping
ill try to get pics up soon

 

[matttaylor1976]

Why are you tempting me??????? I'm gonna be broke when i leave your place next week!

 

[blondejoncherokee]

sorry matt!
ill make some deals if you need alot of parts