Bville99gt
NAXJA Forum User
- Location
- texas
Well found a crankshaft and rods locally but the casting # on the crankshaft says 321 3214 722 will that crankshaft work for my stroker build? Thanks
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Question about 4.5 stoker?? Help
- Thread starter Bville99gt
- Start date
BonesBrosChris
NAXJA Forum User
- Location
- Spokane, WA
Hey... where are some of those 2500 pics? 
Bville99gt
NAXJA Forum User
- Location
- texas
LOL! haven't had time been really busy with the turbo setup and now withe the stroke I promise i'll post today or tomorrow..
Talyn
NAXJA Forum User
- Location
- Radford, Communistwealth of Virginia
The casting number 3214722 is for a '72-'79 232 engine. The stroke is 3.5". While this is a longer stroke than the 4.0L's 3.44", its not as long as the 258's 3.895" stroke. I wouldn't use it.
The casting numbers you are looking for are:
3214723, 1972-80, 12 counterweights, 66lb, 64mm nose
3235477, 1981-86, 4 counterweights, 46lb, 64mm nose
3727, 1987-90, 4 counterweights, 46lb, 54mm nose
The 4723 and 5477 will either require a spacer or have the nose cut for the pulley to fit.
The casting numbers you are looking for are:
3214723, 1972-80, 12 counterweights, 66lb, 64mm nose
3235477, 1981-86, 4 counterweights, 46lb, 64mm nose
3727, 1987-90, 4 counterweights, 46lb, 54mm nose
The 4723 and 5477 will either require a spacer or have the nose cut for the pulley to fit.
