activeshooter1
NAXJA Forum User
- Location
- kansas
depending on your lift it may involve just about dropping the axle, the shallow end near the front of the engine needs room to clear the pickup, you can get it off pretty easy by dropping the pan enough to get to the two bolts that hold the pump on. for reinstaling you need the room. the pan bolts that are around the exaust can be a real pain.
eta been there, if this don't work find a donor motor cause the cam bearing are most likely toast and its cheaper to do a swap than rebuild
eta been there, if this don't work find a donor motor cause the cam bearing are most likely toast and its cheaper to do a swap than rebuild
Last edited: