Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
I found this ad in the for sale section and on Pirate. Jeff lives in Santa Cruz. here's some info on his jeep and the link to Pirate for more info.:
http://www.pirate4x4.com/forum/showthread.php?p=3246067&posted=1#post3246067
I built a new truck and the old one has to go.
1990 Jeep Cherokee Limited
Ready for Rubicon, Pismo, or Hollister
Drivetrain
4.0L strait 6, 167000 mi.
Borla Header.
AW4 auto, 167000 mi.
NP231 T-case, swaped from a 89 XJ
AA SYE
Dana 44 Rear, swaped from a 88 MJ
4.88 gears
Lincon disk brakes
welded diff
Hi-Pinion Dana 30 Front
4.88 gears
Lockright
Non-disconect housing
New in box, spicer driver side axle shaft assembly (inner, outer, u-joint)
Tom Woods rear driveshaft
Stock CV front driveshaft
Suspension
Front
Rubicon Express 4.5" ZJ coils
RE 1.75" spacer
RE TJ longarms, with adjustable uppers
RE HD trackbar with HD bracket
14" travel Bilstien 5100 shocks
Custom longarm crossmember
Rear
Bigoffroad 6" leafs
MJ shackles
14" travel Bilstien 5100 shocks
Other
15x8 AR 767 wheels
35" BFG ATs
Custom sliders
Custom Front Bumper
Custom crossover steering with 3/4 ton chevy TREs
Alpine CD player
Alpine 6.5" door speakers
Alpine 6x9" speakers in hatch
The Bad
Currently Non-Oped because it needs a cat and stock intake to pass smog, new in box high flow cat included
cracked windshield
really dented up front fenders and grille shell, replacement fenders and grille shell included
transfer case used to shift, after sitting for a while it is stuck in 2wd
driver side wheel bearing needs to be replaced, ~$100 new or cheap and plentifull at pick-n-pull
pass side axleshaft should be upgraded, i broke my big one and it has the stocker in it now, ~$130 from quadratec
one side of bumper tore off, i'll weld it back on.
its not pretty, its not as bad as most wheelers on here, but its not as pretty as most anybodys daily driver.
The tires are nothing to write home about, they pretty much hold aiir, and um, are black and round. i'll include 35" 95% MT/Rs off my S10 for $800 more
$3500 obo.
Located in Santa Cruz, CA. Delivery can be arranged for a price.
http://www.pirate4x4.com/forum/showthread.php?p=3246067&posted=1#post3246067
I built a new truck and the old one has to go.
1990 Jeep Cherokee Limited
Ready for Rubicon, Pismo, or Hollister
Drivetrain
4.0L strait 6, 167000 mi.
Borla Header.
AW4 auto, 167000 mi.
NP231 T-case, swaped from a 89 XJ
AA SYE
Dana 44 Rear, swaped from a 88 MJ
4.88 gears
Lincon disk brakes
welded diff
Hi-Pinion Dana 30 Front
4.88 gears
Lockright
Non-disconect housing
New in box, spicer driver side axle shaft assembly (inner, outer, u-joint)
Tom Woods rear driveshaft
Stock CV front driveshaft
Suspension
Front
Rubicon Express 4.5" ZJ coils
RE 1.75" spacer
RE TJ longarms, with adjustable uppers
RE HD trackbar with HD bracket
14" travel Bilstien 5100 shocks
Custom longarm crossmember
Rear
Bigoffroad 6" leafs
MJ shackles
14" travel Bilstien 5100 shocks
Other
15x8 AR 767 wheels
35" BFG ATs
Custom sliders
Custom Front Bumper
Custom crossover steering with 3/4 ton chevy TREs
Alpine CD player
Alpine 6.5" door speakers
Alpine 6x9" speakers in hatch
The Bad
Currently Non-Oped because it needs a cat and stock intake to pass smog, new in box high flow cat included
cracked windshield
really dented up front fenders and grille shell, replacement fenders and grille shell included
transfer case used to shift, after sitting for a while it is stuck in 2wd
driver side wheel bearing needs to be replaced, ~$100 new or cheap and plentifull at pick-n-pull
pass side axleshaft should be upgraded, i broke my big one and it has the stocker in it now, ~$130 from quadratec
one side of bumper tore off, i'll weld it back on.
its not pretty, its not as bad as most wheelers on here, but its not as pretty as most anybodys daily driver.
The tires are nothing to write home about, they pretty much hold aiir, and um, are black and round. i'll include 35" 95% MT/Rs off my S10 for $800 more
$3500 obo.
Located in Santa Cruz, CA. Delivery can be arranged for a price.
Last edited: