- Location
- Southwest IN
OffRoad Fabrication & Design
or
OffRoad Design & Fabrication
or
Hoosier FabWerks
or
OffRoad Design & Fabrication
or
Hoosier FabWerks
New Company Name
- Thread starter BRIANHO13
- Start date
- Location
- Far West Suburb of Chicago
How about......Engineered Offroad Solutions
BOB
BOB
- Location
- Far West Suburb of Chicago
BOB said:How about......Engineered Offroad Solutions
(ooops never mind, you already said that)
BOB
HaleYes
NAXJA Forum User
- Location
- Clay County, IL
Hoosier Design and Engineering.
Oxymoron?
Hoosier Offroad Works (HOW)
Hoosier Offroad Engineering (HOE)
Oxymoron?
Hoosier Offroad Works (HOW)
Hoosier Offroad Engineering (HOE)
Pat
NAXJA Forum User
- Location
- Bloomington, IN
IllianaXJ said:OffRoad Fabrication & Design
or
OffRoad Design & Fabrication
or
Hoosier FabWerks
The first two sound ok, but I just think they're too generic. The last one is more descriptive and gives people something to identify with. However, if they want to go nationwide...I think too many people won't know what a Hoosier is, or how to pronounce it. Hell, I've met people in Indiana that can't even say it right.
- Location
- Southwest IN
Ohio River Fabrication - ORF
BlkXJ21
NAXJA Forum User
- Location
- Frankfort, IL
OK, I'm kinda cheating (stealing a few ideas) but how about Ohio River FabWorks or Offroad Fabricaition and Engineering.
XJ&CHZ4ME
NAXJA Forum User
- Location
- Unionville, MO
How about "2 guys 1 torch"
It seemed to bring some sort of fame to the 2 girls ....ahhh, nevermind.
It seemed to bring some sort of fame to the 2 girls ....ahhh, nevermind.
lancey3
NAXJA Forum User
- Location
- Columbus Ohio
Kentucky Fried Fabrications....LLC of Course.
- Location
- Southwest IN
Ohio River Valley Fabrication -> ORV Fab
- Location
- NE Indiana
Built by Budweiser
mac 'probably already taken' gyvr
mac 'probably already taken' gyvr
- Location
- Central Maine
x20Rev Den said:
alwaysready
NAXJA Forum User
- Location
- Wilmington, Illinois
the question is what do you guys do?
are you an engineering company?, who is the certified structual engineer?
or are you a fab shop? if you call yourself an engineering company people will call you to design stuff for them to make... thats an engineering company.
if you are a fab shop, fab shops design and fab
(i did not say engineer that takes a degree)
KISS keep it simple.
you want people to remember the name __ __'s armor does a good job of KISS
my advise would be to think about something involving offroad fabrication and something to signify you.
as mentioned before Cardinal offroad fabrication is a good fit. company color is already picked as red and black works good.. logo with the bird with 2 mud tires under it easy to do. just my opinion
My background.
We own 2 large strip plazas have seen alot of company names over the last 12 years in them we own 5 different businesses. I personally design and install commercial vinyl decals for companies lighted signs etc.. been involved in that for the last 10 years.
My website in progress. http://www.stickmandecals.com ( open but not done with it yet..)
Notice the name, easy to remember, simple, to the point.KISS
I just hate seeing signs that people put up that i can not tell what they do by their company name. if i cant figure it out how does the normal person just driving by..
hope this helps..
Chris
are you an engineering company?, who is the certified structual engineer?
or are you a fab shop? if you call yourself an engineering company people will call you to design stuff for them to make... thats an engineering company.
if you are a fab shop, fab shops design and fab
(i did not say engineer that takes a degree)
KISS keep it simple.
you want people to remember the name __ __'s armor does a good job of KISS
my advise would be to think about something involving offroad fabrication and something to signify you.
as mentioned before Cardinal offroad fabrication is a good fit. company color is already picked as red and black works good.. logo with the bird with 2 mud tires under it easy to do. just my opinion
My background.
We own 2 large strip plazas have seen alot of company names over the last 12 years in them we own 5 different businesses. I personally design and install commercial vinyl decals for companies lighted signs etc.. been involved in that for the last 10 years.
My website in progress. http://www.stickmandecals.com ( open but not done with it yet..)
Notice the name, easy to remember, simple, to the point.KISS
I just hate seeing signs that people put up that i can not tell what they do by their company name. if i cant figure it out how does the normal person just driving by..
hope this helps..
Chris
BlkXJ21
NAXJA Forum User
- Location
- Frankfort, IL
I'm glad someone liked my idea! Hahaha! Seriously, I have to second Chris' thoughts, you don't want to confuse people with the name. You fab for offroad vehicles period (and if you're UL fans, why not throw that in there???). Let us know once you've made a decision (and what you'll be sellin!!!).
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
Brian you looking to work only on Jeeps or is this any kind of offroad fabrication?
Xtreme Jeeps - XJ
Offroad Productions
Building Advanced Dreams - BAD(as in good)
Thats all I've got they suck sorry...:cheers:
Xtreme Jeeps - XJ
Offroad Productions
Building Advanced Dreams - BAD(as in good)
Thats all I've got they suck sorry...:cheers:
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Ok, to answer a few questions.
Yes we are both degreed Mechanical engineers.
No we are not PE's (doesn't pay that much better for mechanicals)
Yes we will be designing stuff especially if we see a big market for it.
We may eventualy bring machining opertions in house but as of now all fabin will be outsourced.
Not all designs will be XJ related.
As soon as we have our name picked out we will register blah blah blah and we already have two pretty inovative designs done and being prototyped (yes both are xj related).
Oh yea we intend to keep prices on the low side.
Yes we are both degreed Mechanical engineers.
No we are not PE's (doesn't pay that much better for mechanicals)
Yes we will be designing stuff especially if we see a big market for it.
We may eventualy bring machining opertions in house but as of now all fabin will be outsourced.
Not all designs will be XJ related.
As soon as we have our name picked out we will register blah blah blah and we already have two pretty inovative designs done and being prototyped (yes both are xj related).
Oh yea we intend to keep prices on the low side.
Prepmech
NAXJA Member #981
- Location
- Neoga/Decatur, IL
H.D. engineering?
- Location
- NE Indiana
HoPit Fab
Brian's Dirk Fab
Brirk Fab
FaBrikcation
mac 'garage fabbin LLC' gyvr
Brian's Dirk Fab
Brirk Fab
FaBrikcation
mac 'garage fabbin LLC' gyvr
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Thanks for everyone's votes and suggestions, we went with none of them.
Name will be announced as soon as all the paperwork has gone through,
Name will be announced as soon as all the paperwork has gone through,
Similar threads
