MJ3000
NAXJA Forum User
- Location
- Pennsylvania
Ok, I'm trying to figure out how to wire two switches. One is for the E-fan and the other is my KC driving/fog lights. The E-fan works...comes on with the switch. And that's basically it, the driving lights don't work. I have both illumination lights working; however the light that comes on when you switch it ON does not work either. I spliced into the orange wire that lights up the gear indicator for the illumination lights and it worked, but I have no clue to make the ON light work with this method.
And for the driving lights, I have no idea what connects to what. The KC lights came with a nice easy to run wire harness right up to the switch. They worked fine with the switch KC supplied, but as soon as I switched switches, nothing. So I know its the switch, not the lights themselves. The lights have a 3 wires coming into the cab....load, supply, earth. I don't know how to match that up to the incoming, outgoing, and how or where to get power to light up everything else at.
And for the driving lights, I have no idea what connects to what. The KC lights came with a nice easy to run wire harness right up to the switch. They worked fine with the switch KC supplied, but as soon as I switched switches, nothing. So I know its the switch, not the lights themselves. The lights have a 3 wires coming into the cab....load, supply, earth. I don't know how to match that up to the incoming, outgoing, and how or where to get power to light up everything else at.


