Bronzewyrm
NAXJA Forum User
- Location
- Independence,or
March 22/23rd ill open up my Home, Yard, And shop to the mass's. so if you got a project looming that has not seemed to do itself, looking to bounce ideas around, or just want to chill and meet some 
folks. Don't hesitate to come by for a bit.
I should be able to come up with 3 inside slots, one or two covered slots, and probably space for another 3/4 rigs to be parked and worked on at the same time. the welder cord should reach all the slots, and we have plenty of air power to run several areas at once.
Post up or pm me with your logistic plans for the day/days (your list of to do's) and ill do my best to have the shop setup accordingly. Hand grinders, grinder disks, cutoff wheels of assorted sized would be nice cuz I don't think I have many. got plenty of wire, fresh bottle of gas, welding table, clamps, drill press, band saw, and others im forgetting right now. I know we are out of O2 for the cuttN torch. let me know if this is going to be needed and ill try to get it filled. we have some scrap steal we can use. but if you need a bunch. Bring it. we have no tube and no plate laying around. our shop is a restoration shop, not a fabricators shop. so some things are different.
I will be prepping my place for the crew, please post up your plans so that i have an idea of who wants to do what as far as sleeping arrangements and parking. its fair game just let us know so we can have the place ready .
560 Monmouth St
Independence, Or
97351
if you have any question, about anything. please don't hesitate to contact me.
Thanks
Bronze.
folks. Don't hesitate to come by for a bit.I should be able to come up with 3 inside slots, one or two covered slots, and probably space for another 3/4 rigs to be parked and worked on at the same time. the welder cord should reach all the slots, and we have plenty of air power to run several areas at once.
Post up or pm me with your logistic plans for the day/days (your list of to do's) and ill do my best to have the shop setup accordingly. Hand grinders, grinder disks, cutoff wheels of assorted sized would be nice cuz I don't think I have many. got plenty of wire, fresh bottle of gas, welding table, clamps, drill press, band saw, and others im forgetting right now. I know we are out of O2 for the cuttN torch. let me know if this is going to be needed and ill try to get it filled. we have some scrap steal we can use. but if you need a bunch. Bring it. we have no tube and no plate laying around. our shop is a restoration shop, not a fabricators shop. so some things are different.
I will be prepping my place for the crew, please post up your plans so that i have an idea of who wants to do what as far as sleeping arrangements and parking. its fair game just let us know so we can have the place ready .
560 Monmouth St
Independence, Or
97351
if you have any question, about anything. please don't hesitate to contact me.
Thanks
Bronze.
