lift progress

why thanks yella and there will be more 150$ to come :) i painted the coils flat black and it looks great and i still need to hook up a TB any suggestions on my next check which adj. track bar to get?
RE HD with their HD Bracket. Both these comes with their 5.5" Lifts.
 
got a track bar and drove it a little with very little vibes but i still need to tighten my shakle bolts and get an alignment BAD
 
little flex pics
2qlydk0.jpg

2lktrmp.jpg
 
Lookin pretty good man!! Keep up the improvements.....they are addicting!!
 
just waitin on the paycheck then gettin an alignment and some jks quicker disconnects for the sway bar! my steering is fubard, but i drove it and its not as stiff as i thought it would have been, and no DW. also might order some drop brackets but not quite sure yet. it is leaning a little to the left when im looking straight at it, think i might have put the coils on the wrong side?
 
well if its leaning towards the driver's side then it'll probably level out once you've driven it awhile.

look at the RE GenII disconnects too man, they include a second pin that bolts to your Jeep and holds up the sway bar when its disconnected from the axle. no zipties or lacing wire needed
 
well if its leaning towards the driver's side then it'll probably level out once you've driven it awhile.

look at the RE GenII disconnects too man, they include a second pin that bolts to your Jeep and holds up the sway bar when its disconnected from the axle. no zipties or lacing wire needed

Who needs a damn swaybar anyway.....swaybar free since July "08!!
 
DON'T WASTE HARD EARNED MONEY ON AN ALIGNMENT FOR YOUR XJ!!

http://www.luvmyjp.com/forum/showthread.php?t=36

Your rear leaf and shackle bolts should not be tightened all the way down. Back them off, you'll get better ride and movement with them a little loose.

i know about that and i am nowhere near good at that stuff so i would rather pay someone to do it right. and i figured that out too i still gotta take out the bumper bolt so it can go just that much further
 
there is a wee bit of a problem with it it seems to lean slightly to the right but its no big deal i already tried to swich the coil springs around and that didn't do nothin
 
Back
Top