thechief86
NAXJA Forum User
- Location
- White House, TN
flexdxj, huh? i don't think i'd want mine flexin that direction...
Lift blocks?
- Thread starter arsxj1
- Start date
JRW7072009
NAXJA Forum User
- Location
- Bullhead City, AZ
Blocks are okay on a DD but for wheeling and rock crawling they are not so good. There are many fullsize trucks that come from the factory with blocks and the dont have issues. I would never run blocks on my XJ.
MaxxXJ
NAXJA Forum User
- Location
- Bakersfield CA
IIRC trucks use steel blocks or they might be poly now
and the aftermarket autozone specials are cheap aluminum...
JRW7072009
NAXJA Forum User
- Location
- Bullhead City, AZ
Steel, I have not see any poly ones I lift a lot of brand new trucks. A lot of lift kits come with aluminum blocks and I have not see any of our trucks we lift have issues with them. But I would also never put a auto zone block on any vehicle.
MaxxXJ
NAXJA Forum User
- Location
- Bakersfield CA
i did for about 4-6 months but only because i got some 2" lift coils and needed something to lift the rear... 4-6 months later i got some 4.5" coils and did a bastard pack... tossed the blocks and happy as can be =)
Darky
NAXJA Forum User
- Location
- 29 Palms, CA
Search on here about blocks and bastard packs, there's lots of info.
Regarding RE, I don't know if mine are just a bad apple or if it's someting wrong in my Jeep, but a year and a half after installing them, I'm leaning heavily to the passenger side and clunking from the same side. Just like I was with the crappy s-shaped stock leafs...
Regarding RE, I don't know if mine are just a bad apple or if it's someting wrong in my Jeep, but a year and a half after installing them, I'm leaning heavily to the passenger side and clunking from the same side. Just like I was with the crappy s-shaped stock leafs...
