northwestxj
NAXJA Member #1283
- Location
- washington
I'm doing the WJ knuckle conversion and am having a problem with the drivers side knuckle not seating all the way up on the ball joint. The passenger side went fine, but for some reason the knuckle wont go all the way up on the drivers and there is a little gap. The lower seems to be pretty close though. I am using WJ ball joints, lowers and uppers.
Both are torqued correctly, (lower 80 foot pounds, and upper 75). I need to get this done, any ideas?
Heres a couple pics for reference...
Both are torqued correctly, (lower 80 foot pounds, and upper 75). I need to get this done, any ideas?
Heres a couple pics for reference...