Jeep Salvage Yard With Over 130 Jeeps

[seanR]

JUST IN FOR REBUILDERS:
...
2003 LIBERTY SPORT FRT AND REAR DAMAGE 7K MILES
...

I thought you said you only had Jeeps? What are you doing with this POS!?

 

[EGYPT1]

A liberty will outlast any xj. the libertys unibody is much stronger than the xj's. check one out underneath sometime. the libertys frame rail system is even stronger than the grand cherokee wj's. the only bad thing is that they do not have any suspension travel and the gas mileage is terrible . if you want to see a cool looking liberty email me and i will show you.
[email protected]

 

[seanR]

Dude!

 

[woody431]

93-95 H.O. Cylinder head, bare, needs to be in good shape. I just need to make sure it's the same head thats from a 95 HO, let me know. Thanks

Egypt, got one?

 

[EGYPT1]

I have a 93 grand cherokee 4.0 head with 70k miles. the engine ran great. the price is $100 plus shipping. davey
[email protected]

 

[mike86xj]

any 4" lift coil springs for a 86 xj?

 

[EGYPT1]

I cannot help with the lift springs. they go fast when i get them. thanks, davey
[email protected]

 

[Big Bear]

I am looking for a 95 to 98 ZJ (Grand Chreokee) proprtioning valve off one with 4 wheel disks. I also am looking for a 99 or newer intake manifold off a 4.0 (any modle jeep will do) Let me know prices if you can.
Thanx, Mike

 

[EGYPT1]

I am looking for a 95 to 98 ZJ (Grand Chreokee) proprtioning valve off one with 4 wheel disks. I also am looking for a 99 or newer intake manifold off a 4.0 (any modle jeep will do) Let me know prices if you can.
Thanx, Mike

I have a prop valve frm a 96 zj for $25 plus shipping.
i have the 99 and newer intake for $150 bare
[email protected]

 

[Urban Redneck]

Gas tank skid for a '00?

 

[EGYPT1]

I only have a transfer case skid plate. No gas tank skid plates at this time.

 

[Big Bear]

I have a prop valve frm a 96 zj for $25 plus shipping.
i have the 99 and newer intake for $150 bare
[email protected]

As long as the prop valve came off one with 4 wheel disk I will take it. $150 is to steep for the intake though. I can buy one from my dealer new for $170. Do you take pay-pal or should I give you a call?
Thanx, Mike

 

[EGYPT1]

As long as the prop valve came off one with 4 wheel disk I will take it. $150 is to steep for the intake though. I can buy one from my dealer new for $170. Do you take pay-pal or should I give you a call?
Thanx, Mike[/QUOTEemail me directly with a zip and i will get you a shipping cost on the 4 wheel disc prop valve. davey
[email protected]

 

[gr8tires]

:eyes:
How about a rear bumper and brackets for an 88 Comanche shortbed??
Zip is 28209

 

[EGYPT1]

i have already sold the mj rear bumpers. thanks, davey
[email protected]

 

[staticrevolution]

Ok bet you MUST have a 2WD front axle beam? Noone wants one of those! Except me! Cost of shipping to Oregon to much?

Alan

 

[EGYPT1]

I have scrapped all of the 2wd axles. davey
[email protected]

 

[staticrevolution]

well if you get one in let me know!

Alan

 

[WrenchMonkey]

Driver's side kick panel (under the dash, in front of the door)? For a 90 laredo, if it matters, grey interior...

Thanks
Robert

 

[SPSERG]

How about a set of later model roof rack runners? Not the side to side racks, but the rails that run from front to back. Thanks!