Its not purple: Jeep Build

[Dezzzy]

so i picked up my first Cherokee for $300 body is in real good shape not much rust and no damage. The pump seal on the tranny was shoot cause some dumb **** mounted the tranny with one bolt. replaced the seal and haven't had any issues yet.

the plan is to weld the rear, lift it 3.5", put some shitty as tires on it and beat the shit out of it. right now im into it for about 700, and im trying to keep it under $1000. so if you got some spanked 15" 31-33 hit me up.

 

[DunkinDeezNutz]

I have a used RE 3.5 lift from my part out, you can have it for $300. Coils, lower CA's, rear leafs, you can even have the rear break line.

 

[Dezzzy]

CTeunuch is selling me his for $200 thanks though

 

[DunkinDeezNutz]

Tell Pat he can suck it

 

[squashman702]

33's only Dan.

 

[cmelo]

CTeunuch is selling me his for $200 thanks though

Nice purple jeep! Make sure you lift it enough, wouldn't want your dong dragging on the ground while you're driving every time you forget to roll it up and put it in the glove box.

 

[squashman702]

Nice purple jeep! Make sure you lift it enough, wouldn't want your dong dragging on the ground while you're driving every time you forget to roll it up and put it in the glove box.

You mean when he buckles it in to all three of the back seats?

 

[Dezzzy]

Nice purple jeep! Make sure you lift it enough, wouldn't want your dong dragging on the ground while you're driving every time you forget to roll it up and put it in the glove box.

i don't think they sell 12 foot lifts

 

[cmelo]

i don't think they sell 12 foot lifts

You're gonna have to sit on the roof

 

[CTeunuch]

Tell Pat he can suck it

:wave: He does need those coils though...

33's only Dan.

x2, man up Dan.

 

[sardo_67]

buy this!!!
http://naxja.org/forum/showthread.php?t=1099088

will make for a bad ass rig

 

[Dezzzy]

fixed the out put shaft speed sensor, just need to drive a couple miles make sure the CPU is reset or whatever then hopefully i will be able to throw some sliders on it before sat and mabye even weld the rear end.

 

[squashman702]

fixed the out put shaft speed sensor, just need to drive a couple miles make sure the CPU is reset or whatever then hopefully i will be able to throw some sliders on it before sat and mabye even weld the rear end.

Did you end up returning the sensor?

 

[billyjp2]

weld the front end too.

 

[CTeunuch]

weld the front end too.

Don't give him any ideas...

 

[Burton58]

i have about 8-9 beat up 33's that you can have for free. all hold air and i was still wheeling on till i got new tires

 

[Dezzzy]

Did you end up returning the sensor?

yea the guy gave me a hard time but i still got my money back, for future reference if you install then remove an electrical item, from autozone, come up with a good lie if you return it

threw two new codes makes a total of four codes that have come up then gone away! already sick of it purple xj $1500 anyone

 

[Dezzzy]

i have about 8-9 beat up 33's that you can have for free. all hold air and i was still wheeling on till i got new tires

if i can have 5 ill take a look at them, free is free send me some pictures.

 

[squashman702]

yea the guy gave me a hard time but i still got my money back, for future reference if you install then remove an electrical item, from autozone, come up with a good lie if you return it

threw two new codes makes a total of four codes that have come up then gone away! already sick of it purple xj $1500 anyone

What'd he tell you?

 

[Burton58]

wrote this up a couple months ago that's why it's all caps.

1 of them i gave away and can't remember which it was but you can have 5 if you want

ALL TIRES HOLD AIR PERFECTLY BUT SOME HAVE QUITE A BIT OF DRY ROT
-1 TIRE HAS A SIDEWALL PLUG BUT WAS STILL DRIVEN ON AND WHEELED UNTIL TODAY
-1 HAS A TREAD PLUG
-4 ARE NEAR BALD BUT NO PLUGS
-1 HAS LOTS OF CUTS AND DRY ROT BUT HAS TREAD AND HOLD AIR GREAT... this may be gone, or the one with the tread plug. can't remember
-1 ALL TERRAIN IS IN PRETTY GOOD SHAPE
-1 HAS A SIDEWALL SLICE BUT FREE IF YOU WANT TO PATCH IT