- Location
- NE Indiana
If you are going to be the best be the best at everything.:worship:
wonder if I can do better than 100 out of 100...
mac 'extra credit?' gyvr
If you are going to be the best be the best at everything.:worship:
Good news.
In other janky ass wiring finds, y'all inspired me to look into a light switch that does nothing (since we moved in 7 years ago). Took the wall plate off and switch wasn't hooked up. Little more investigation and the switch turns on and off every single outlet in the room.
Not good for an office w computer so I left it alone and will continue to use the corner lamp.
I can't remember a national speech that the networks didn't air by a sitting president.
mac 'they must not want to screw thier ratings up' gyvr
okay....so electrically inclined folks....
we have an issue with this show that i've never seen before. in this show i have kids wearing wireless mics going down a plastic slide. the static electricity is building out and shorting out the wireless mics and causing them to go in to protection mode...thus shutting them down until i can get someone to reset them. basically the actor wears a mic wire (single conductor with a shield and a ground wire) that runs from their head down their back and into the pack...i think the charge is getting through the shield on the wire and causing the short....insulating the wires more is not an option...so any way to cut static on a plastic slide or discharge it? any thing better than static guard that could cut down on the charge?
The floor is painted masonite. ..i thought about this, but cant see an easy way to do itwhat's the floor material?
Can you ground the slide to earth?
Also how are you burning 3000 kWh a month!?
My house has 2 feet or more of blown in insulation in the attic...
mac 'gas heat is cheap even with two furnaces' gyvr