O-Gauge Steamer
NAXJA Forum User
- Location
- Colorado Springs, Colorado
Re: new aux e fan
The fan out of a Taurus will fit into the mechanical fan shroud. Use a fan from a Taurus with the dual fan setup, not the single fan as it is way too large.
Be advised that if you want it to run at both speeds, you will need the dropping resistor that is located in the Ford shroud. Also, if you go this way, grab all of the wiring from the Donor including the Fan Relay Box that sets outboard from the battery. There are three relays in the box to control the fans. Why reinvent the wheel? I am running this setup in mine.
The fan out of a Taurus will fit into the mechanical fan shroud. Use a fan from a Taurus with the dual fan setup, not the single fan as it is way too large.
Be advised that if you want it to run at both speeds, you will need the dropping resistor that is located in the Ford shroud. Also, if you go this way, grab all of the wiring from the Donor including the Fan Relay Box that sets outboard from the battery. There are three relays in the box to control the fans. Why reinvent the wheel? I am running this setup in mine.