IslanderXJ
NAXJA Forum User
- Location
- Avalon and San Luis Obispo
Axles out of a 1977 Ford F-150
Full width, around 65" wms-wms
Dana 44
-High Pinion
-5x5.5"
-Chevy Knuckles, machined, drilled and tapped for high steer arms.
-Warn Lockouts
-No Brakes, uses 76 chevy truck calipers and 77 Ford rotors, cheap easy to find.
Ford 9"
-31 Spline
-Big Bearing Third
-Drum Brakes
Both axles are torn down and have minor surface rust. Needs quick sandblast/scotchbrite followed by some paint and new bearings with seals.*
$1000 OBO
Sent from my SM-T810 using Tapatalk
Full width, around 65" wms-wms
Dana 44
-High Pinion
-5x5.5"
-Chevy Knuckles, machined, drilled and tapped for high steer arms.
-Warn Lockouts
-No Brakes, uses 76 chevy truck calipers and 77 Ford rotors, cheap easy to find.
Ford 9"
-31 Spline
-Big Bearing Third
-Drum Brakes
Both axles are torn down and have minor surface rust. Needs quick sandblast/scotchbrite followed by some paint and new bearings with seals.*
$1000 OBO
Sent from my SM-T810 using Tapatalk