mcraindog
NAXJA Forum User
- Location
- Middle, Georgia
Is it going to be necessary to cover these up for the winter in aspen?
Hood vents and Winter
- Thread starter mcraindog
- Start date
Is it going to be necessary to cover these up for the winter in aspen?
SurfXJSnow
NAXJA Forum User
- Location
- Charlottesville, VA
no. i had the lebarons on my XJ and didnt have an issue all winter. even when i had a foot or 2 of snow on my hood melting into my engine bay.
just as much water gets in your engine bay when driving in rain, or through a puddle.
just as much water gets in your engine bay when driving in rain, or through a puddle.
mcraindog
NAXJA Forum User
- Location
- Middle, Georgia
did you have the vents in a similar spot? even the freezing of water on some of the engine components won't matter? (throttle body and distributor)
SurfXJSnow
NAXJA Forum User
- Location
- Charlottesville, VA
mine were centered a bit more to the middle of the hood, but i wouldnt think it would make that big of a difference. your distributor should be fine. may want to wrap the top of it with saran wrap, or even install a drip pan if you forsee any issues, but i dont. throttle body should be fine.
i wouldnt worry dude. i have never heard a story of someone have issues with the vents and water getting in.
i wouldnt worry dude. i have never heard a story of someone have issues with the vents and water getting in.
flingshot
NAXJA Forum User
- Location
- Thornton Colorado
Uh Oh!
Just kidding. I'm not worried one bit about mine.
I think there is a pool going around though where some are betting I will have troubles. LOL!
Just kidding. I'm not worried one bit about mine.
I think there is a pool going around though where some are betting I will have troubles. LOL!
SurfXJSnow
NAXJA Forum User
- Location
- Charlottesville, VA
Uh Oh!
Just kidding. I'm not worried one bit about mine.
I think there is a pool going around though where some are betting I will have troubles. LOL!
does your engine really get THAT hot? good lord man!
flingshot
NAXJA Forum User
- Location
- Thornton Colorado
mcraindog
NAXJA Forum User
- Location
- Middle, Georgia
haha...i like the look of it. original for sure
flingshot
NAXJA Forum User
- Location
- Thornton Colorado
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Fling's hood is just plain secksi. :thumbup:
I'm beginning to believe there just might be some issue with the throttle body sensors getting repeatedly wet. My '97 has Lebaron vents and the previous owner said over the many years he's had those vents on, he's had to replace the TPS 8 times for what he believed was water destroying it. He put a brand new one on before I drove it home.
After the last snow storm, the XJ had 32" of snow on it and most of it melted off - much of it through the vents.
...... Now the damn thing won't idle. It'll start, but won't sit and idle without me feathering the gas pedal...... :dunno:
My previous rig had your same vents (280Z's) but they were positioned on the front corners - above the air cleaner and battery. Never had an issue with the cone filter on the CAI being wet like I thought I might.
I'm getting rid of the Lebaron vents in favor of one of them cool Reflexion Steel Cowl hoods in the near future.
I'm beginning to believe there just might be some issue with the throttle body sensors getting repeatedly wet. My '97 has Lebaron vents and the previous owner said over the many years he's had those vents on, he's had to replace the TPS 8 times for what he believed was water destroying it. He put a brand new one on before I drove it home.
After the last snow storm, the XJ had 32" of snow on it and most of it melted off - much of it through the vents.
...... Now the damn thing won't idle. It'll start, but won't sit and idle without me feathering the gas pedal...... :dunno:
My previous rig had your same vents (280Z's) but they were positioned on the front corners - above the air cleaner and battery. Never had an issue with the cone filter on the CAI being wet like I thought I might.
I'm getting rid of the Lebaron vents in favor of one of them cool Reflexion Steel Cowl hoods in the near future.
mcraindog
NAXJA Forum User
- Location
- Middle, Georgia
hmm...so that sounds like i should cover them when sitting atleast
mcantar18c
NAXJA Forum User
- Location
- Fayettnam
Raindog, have you seen what Eric did with his?
Check it out...
http://www.ericsxj.com/vents.htm
He gets into the drip pan part towards the bottom.
Check it out...
http://www.ericsxj.com/vents.htm
He gets into the drip pan part towards the bottom.
