Headlight Upgrade

[Kiefer316]

Yup works with stock lamps. I just have Ebay H4 housings with some junk bulbs that came with them. Gonna be getting some Fatboy bulbs soon!

 

[in4aride]

Ya th housings and bulbs Kiefer has are like $30 shipped lol. But ya works with stock too. Altho I have heard of high beam issues with stock.

 

[Rockken]

Thanks guys. I'm going to order now.

 

[Gonepostal]

I run E-Code housing (Cibié are stock in France), with H4 HID from V-Leds (Hi/Low, comme with a new harness). It's almost perfect

Running the same setup with a Dan Stearns harness....worth every penny. The Cibies are great and very well designed. I have avoided several of our car killing mule deer already.

 

[in4aride]

Thanks guys. I'm going to order now.

anytime man.

if you decide to upgrade to the housings and H4's like kiefer is running lemme know ill send ya a link

 

[enthusiast]

anytime man.

if you decide to upgrade to the housings and H4's like kiefer is running lemme know ill send ya a link

I would be interested in a link. I just upgraded mine as well.

 

[in4aride]

heres a link. should last a couple days

http://cgi.ebay.com/ebaymotors/H6054-H4-XENON-BULBS-DIAMOND-HEADLIGHT-240SX-CHEROKEE-/180548257204?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AJeep%7CModel%3ACherokee&hash=item2a0983c5b4

 

[afbond03]

I am running my harness with Silverstars, great improvement over stock for sure.

 

[enthusiast]

heres a link. should last a couple days

So the housing are descent but the bulbs are ok?

 

[in4aride]

Housings give a bit of scatter at edges. But way better than stock. Bulbs are what Kiefer has in his pic

 

[loren mcclellan]

dose are seggsy... I gotta go to work!!!!

 

[time2getdirty]

http://www.eautoworks.com/product-eAutoWorkscom-189849.htm

Are these for both or just one side? By far the cheapest I have seen eather way!

 

[Kiefer316]

It's for both sides connects on one side of the stock harness then goes to both head lamps.

 

[Fred]

If you have the stock driving lights, high beams might not work. I've got a harness from Big Offroad(looks the same, hmm), and my high beams don't work. It's been chatted about on the board, I don't recall the solution. Not a big deal for me since I've got Hella reflectors, and IPF bulbs, low beams are just fine.

 

[Boveevil]

I have the harness from eautoworks in mine and hi/low beams both work.

 

[collkid]

So I'm confused as to where this harness plugs into? This seems like a good option for me, with this and those housings mike posted up.

 

[GregGA]

Harness sounds great. Are there instructions with it? Thanks!

 

[Frank Z]

So I'm confused as to where this harness plugs into? This seems like a good option for me, with this and those housings mike posted up.

Very simple hook-up. You disconnect your lights and plug the existing harness into the new harness. The new harness connects to your headlights, battery and ground.

Basically the OEM wiring is used to energize relays that control the power to the headlights that now comes directly from the battery.

Make sense?

 

[Fred]

http://www.naxja.org/forum/showthread.php?t=1056442&highlight=headlight+harness

 

[collkid]

Oh very nice, and this makes a Good difference on the Stock head lights? This seems to be better/cheaper then getting a whole bunch of lights...