chedisme
NAXJA Member
- Location
- middletown, NY
My bolt in Stak, with all the options I wanted, was in stock in Baltimore. Got it in one day even
Didn't you buyit used?
What gear ratios did you get?
Harold of the Rocks
- Thread starter chedisme
- Start date
Didn't you buyit used?
What gear ratios did you get?
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Don't mind him, hes mentally retarded.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
And mark is too retarded to realize im making a joke.
It got a monster box; 1:1, 3:1, 5.44:1, 23 spline, 1310 cv yokes,different clocking rings, shifters vss, etc outta a tj for like $1750
chedisme
NAXJA Member
- Location
- middletown, NY
yea thats pretty much what i got.
I should have just bought yours from you cause your never gonna use it.
I should have just bought yours from you cause your never gonna use it.
rweaver138
NAXJA Forum User
- Location
- Brooklyn, CT
chedisme
NAXJA Member
- Location
- middletown, NY
So Im in the process of canceling my order with Stak.
I placed my order on the 19th of april, and they have yet to charge me. Iv had bad experiences with other 4x4 companys so im nipping this one in the bud before it even starts.
Plus Atlas came out with the re-worked 4speed. its sick. 4 speeds-1:1,2.7:1,3.4:1,8:1 /independent front rear output control/ it has syncros for shift on the fly/ xj specific shifters/ speedo/ all for 400$ less!
the Stak doesn't hold a candle to this thing!
plus im kinda pissed that Stak wanted 400$ to ship the 3speed form tx, and AA is shipping a bigger case all the way from CA, and only wants 120$
I placed my order on the 19th of april, and they have yet to charge me. Iv had bad experiences with other 4x4 companys so im nipping this one in the bud before it even starts.
Plus Atlas came out with the re-worked 4speed. its sick. 4 speeds-1:1,2.7:1,3.4:1,8:1 /independent front rear output control/ it has syncros for shift on the fly/ xj specific shifters/ speedo/ all for 400$ less!
the Stak doesn't hold a candle to this thing!
plus im kinda pissed that Stak wanted 400$ to ship the 3speed form tx, and AA is shipping a bigger case all the way from CA, and only wants 120$
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Buy Ross' STAK. I hate the friggin' thing...
MrSimon
NAXJA Forum User
- Location
- Downingtown, PA
Sounds like a much better deal!
chedisme
NAXJA Member
- Location
- middletown, NY
Yea the only thing that sucks is that theatlas wont be ready untill september. But id rather wait for a better product.
chedisme
NAXJA Member
- Location
- middletown, NY
So I placed my order today for the ATlas. and I have to say Advanced adapters is an Amazing company. the guy mike I talked with was incredibly knowledgeable. He knew all the answers to every one of my questions and even answered some before I asked. I felt like I was just BSing jeep stuff with a buddy, instead of placing a large$ order. he even threw in a free speedo gear so my speedo wont read 90+ to do 65.
I have so much more confidence with my new order.
he said it might be done by the end of june, but he couldn't make any promises.
Atlas 4sp= $4105
Stak 3sp= $4700
big F-ing difference.
and this time I didnt get that depressing feeling I got when I got off the phone with Stak!! Im so pumped for this!
oh and I went 8.1:1 so you can suck it ross. ha
I have so much more confidence with my new order.
he said it might be done by the end of june, but he couldn't make any promises.
Atlas 4sp= $4105
Stak 3sp= $4700
big F-ing difference.
and this time I didnt get that depressing feeling I got when I got off the phone with Stak!! Im so pumped for this!
oh and I went 8.1:1 so you can suck it ross. ha
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
[Insert Bill voice] Damn, last time I looked I thought Stak's were like $3700ish [/voice]
The new ratios for the 4spds sound nice. If I had bought new, I guess I woulda gone Atlas too.
The new ratios for the 4spds sound nice. If I had bought new, I guess I woulda gone Atlas too.
chedisme
NAXJA Member
- Location
- middletown, NY
Ha sorry I washalf asleep when I wrote that. Its 3700 and 3100.
ZipperheadXJ00
NAXJA Forum User
That's still a chunk of change!
chedisme
NAXJA Member
- Location
- middletown, NY
It is alot of money. But I got that much back for taxes this year. Its the first year I didn't have to pay in years. So I didn't expect it. Based on that I like to think I got the case for free.
ZipperheadXJ00
NAXJA Forum User
Sounds like solid logic to me! 
MrSimon
NAXJA Forum User
- Location
- Downingtown, PA
You and I think a lot alike. My tax return all went to my Jeep as well .... even though I know better, it feels like free money and I like it!!!
chedisme
NAXJA Member
- Location
- middletown, NY
Well I started building tube doors. Well I built the hinge for the passenger side. But its a start.
Ill try to get a pic up some time today.
Ill try to get a pic up some time today.
chedisme
NAXJA Member
- Location
- middletown, NY
ok so Its been a while.
heres the up date
got my Atlas
the box is completely filled with foam like encased it Great Stuff foam. it was a pain getting it out.
but I finally got it out
put my shifters together
Installed it and thought it went well... a little too well...
until I tried to put my cross member/belly pan back up.
I had to clock it down quite a bit to get it to clear my floor. but then it hits my belly pan.
so I decided im going to pull the case and cut my floor open clock it flatter. what sucks it that im going to have to cut the studs off and order new ones, as they threaded so tight that they were next to impossible to get in, I cant imagine them ever coming out
heres where I plan on cutting.
I cut on the blue lines and am going to fold it on the green. Im just going to get the case where I need it and make the hump as small as I can.
heres the up date
got my Atlas
the box is completely filled with foam like encased it Great Stuff foam. it was a pain getting it out.
but I finally got it out
put my shifters together
Installed it and thought it went well... a little too well...
until I tried to put my cross member/belly pan back up.
I had to clock it down quite a bit to get it to clear my floor. but then it hits my belly pan.
so I decided im going to pull the case and cut my floor open clock it flatter. what sucks it that im going to have to cut the studs off and order new ones, as they threaded so tight that they were next to impossible to get in, I cant imagine them ever coming out
heres where I plan on cutting.
I cut on the blue lines and am going to fold it on the green. Im just going to get the case where I need it and make the hump as small as I can.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Just cut it all out and clock the case above the bottom of the rails. Flat bottom!!!
twodoorXJ
NAXJA Forum User
- Location
- northern new jersey
Thats pretty rad.
Similar threads
- Locked