Gears, locker, Diff service D30 alloy shafts!

[Rawbrown]

D30 alloy shafts complete, $500. expected availability- mid Feb.
D30, D44 Gearsets, $130.
Detroits, $500
ARB's $595
New axles Complete- Call
Gear installs starting at $150
Southern California

Ryan Brown
Rawbrown
760-505-9924
[email protected]

 

[Phil]

Emailed you about your other post, then saw this. Do you have D44 spools?

 

[Phil]

Thanks Ryan! arty:

 

[Bryan C.]

What type of alloy shafts are you offering? I will send you a PM.

Bryan

 

[Rawbrown]

Yukon Axle 4340 CrMo front shafts. complete with full circle clipped 5-760x u-joints.

shipped at $500/set...

 

[basalt51]

9" gears?

 

[Rawbrown]

what ratio?

brand new with 2 year warranty.

 

[basalt51]

4.88s. I'ld be interested in reverse cut D30 4.88s as well. What about a warn premium hub conversion too!!! Who makes the gears?

 

[Phil]

TTT for a vendor who really gave me a deal!

 

[offroadman83]

I would like to know the same thing as basalt51----------Kyle

 

[dwhiddon]

how much for 4.88's for high pinion d30, and d44, with master install kits? Shipped to 36067.

 

[Rawbrown]

gears are $120/set

master install kits are $75 and $85
carriers are $55
shipping is $20
Thanks

 

[dwhiddon]

So $420 shipped to 36067?

 

[Rawbrown]

yes,

go to www.rawbrown.com
or email [email protected] for further info...
Thanks

 

[trekker]

Hey Rawbrown,
I just sent you an email at your business website, but see you are here.
I have a 91 8.25 27-spline w/ Auburn limited slip. I have an ARB up front and wondered about cost/difficulty in getting rear ARB.
Thanks,
Todd

 

[PWRDrill]

gears are $120/set

master install kits are $75 and $85
carriers are $55
shipping is $20
Thanks

What kind of gears and bearings are you using? I may be ordering from you as well...

Kevin

 

[Rawbrown]

Yukon Gears with a 2 year warranty. Timken Bearings, and national Seals.

What kind of gears and bearings are you using? I may be ordering from you as well...

Kevin

 

[LBEXJ]

Rawbrown ... I sent you a PM requesting pricing on gears and lockers. Just wonderin' if you've had a chance to check your private messages. :wave1:

Les

 

[LBEXJ]

Thanks Rawbrown for the reply PM ... I'm pretty sure you'll be hearing back from me within the next couple of days.

Les

 

[Bryan C.]

Yukon Axle 4340 CrMo front shafts. complete with full circle clipped 5-760x u-joints.

shipped at $500/set...

Just thought I would give you some good feedback on this thread. I got the shafts as promised, there was a backorder problem with the axle vendor, but Ryan came through with a great soloution and took good care of me. Good customer service, he always responded to my e-mails within a few hours. Good guy to deal with. I would highly recommend his company.

Bryan