uncc civilengineer
NAXJA Forum User
- Location
- Winston Salem, NC
Well I really want to build a buggy and funds will not allow for 2 trail vehicles. SO, If I can sell the XJ I'm going to build a 2 seater buggy (w/ XJ grille of course) Basically the jeep is currently setup to be a trailer queen. But this is strictly due to the Competition Compound Tires (to $$$ and soft for road duty). I DD'd the XJ on 36" Bias Iroks so could easily be converted back to a road worthy vehicle (w/ some trail scars ofcourse).
Details:
1998 Cherokee XJ Limited (no plastic, headliner, and rhino lined)
89,435 Miles
Alpine CD player
I mangled the rear hatch at DPG a few weeks ago but have access to another rear hatch if the buyer wanted it. I have quite a list of parts so here's some of what's on it:
1994 Isuzu Rodeo Dana 44 (Yukon 5.13's, LockRight, Disc's, TNT Customs Truss, Spidertrax 1.25" Spacers, 1.5" TNT UBE's)
1991 Grand Waggy 44 (Yukon 5.13's, Aussie, Warn Premium Hubs, Alloy USA 4340 shafts) + steering & trackbar
Rock Krawler Gen3 3-link
RE Heavy Duty Trackbar Bracket
RE 3.5" ZJ Springs
RE 3/4" Spacer
RE 3.5" Rear Spring packs
RE 1.5" Boomerang Shackles
Rocky Road Outfitters Rock Rails
Essentially Offroad Cage 1.75" .120wall DOM
Spare D44 Front shafts (1 long inner, 1 short inner, 1 stub)
Spare D44 Rear shafts (w/ rotors & ebrakes)
17x8 DIY Beadlocks (RuffStuff weld on + Cragar Soft 8's) 6x5.5 pattern
1 NEW Sticky 37x12.5 MAXXIS Trepador (Comp. Compound)
4 USED Sticky 37x12.5 MAXXIS Trepadors (Comp. Compound)
THOR rear quarter guards + LEDs
Rigid Co. Front Winch Bumper
Rigid Co. Rear Bumper w/ Wrap Around Corners (cut/fold)
Warn M8000 (100' cable + roller fairlead)
TNT Customs Inner Steering Box Brace
VIAIR 450C Compressor Kit + 2.5 gal. Viair Tank
23 Sp. NP242 w/ RE H&T and Tom Woods Shaft
And I'm sure there's more that I've forgotten to list:
I need to get $10,000.00 out of it...
Details:
1998 Cherokee XJ Limited (no plastic, headliner, and rhino lined)
89,435 Miles
Alpine CD player
I mangled the rear hatch at DPG a few weeks ago but have access to another rear hatch if the buyer wanted it. I have quite a list of parts so here's some of what's on it:
1994 Isuzu Rodeo Dana 44 (Yukon 5.13's, LockRight, Disc's, TNT Customs Truss, Spidertrax 1.25" Spacers, 1.5" TNT UBE's)
1991 Grand Waggy 44 (Yukon 5.13's, Aussie, Warn Premium Hubs, Alloy USA 4340 shafts) + steering & trackbar
Rock Krawler Gen3 3-link
RE Heavy Duty Trackbar Bracket
RE 3.5" ZJ Springs
RE 3/4" Spacer
RE 3.5" Rear Spring packs
RE 1.5" Boomerang Shackles
Rocky Road Outfitters Rock Rails
Essentially Offroad Cage 1.75" .120wall DOM
Spare D44 Front shafts (1 long inner, 1 short inner, 1 stub)
Spare D44 Rear shafts (w/ rotors & ebrakes)
17x8 DIY Beadlocks (RuffStuff weld on + Cragar Soft 8's) 6x5.5 pattern
1 NEW Sticky 37x12.5 MAXXIS Trepador (Comp. Compound)
4 USED Sticky 37x12.5 MAXXIS Trepadors (Comp. Compound)
THOR rear quarter guards + LEDs
Rigid Co. Front Winch Bumper
Rigid Co. Rear Bumper w/ Wrap Around Corners (cut/fold)
Warn M8000 (100' cable + roller fairlead)
TNT Customs Inner Steering Box Brace
VIAIR 450C Compressor Kit + 2.5 gal. Viair Tank
23 Sp. NP242 w/ RE H&T and Tom Woods Shaft
And I'm sure there's more that I've forgotten to list:
I need to get $10,000.00 out of it...


