loki_racer
NAXJA Forum User
- Location
- Pittsburgh, PA
Please link up a write up about this 4 step system. I'd love to hear if it actually works and is worth it. Sounds like a killer interior.
Floor Finish Ideas
- Thread starter Jamescad04
- Start date
Jamescad04
NAXJA Forum User
- Location
- Charlotte, North Carolina
X'2 Please
WrenchedXJ
NAXJA Forum User
- Location
- Fuquay Varina, NC
Has the 4 part system begun yet. Id be curious to see how it turned out. I just recently decided to take my XJ to the spa and it got to happy in the mud.
While I say never again, it'll happen probably again or at least I will cross a river at some point. I plan on installing drain plugs because paddling mud out of my floorboards isnt high on my priority list. I like the comfort of the carpet, but after the above, not quite sure how much the pressure washer will be able to do. This isnt my daily driver, just a toy, but I still would like to be comfortable while on the trails. How is the noise and heat levels with the Raptor liner?
While I say never again, it'll happen probably again or at least I will cross a river at some point. I plan on installing drain plugs because paddling mud out of my floorboards isnt high on my priority list. I like the comfort of the carpet, but after the above, not quite sure how much the pressure washer will be able to do. This isnt my daily driver, just a toy, but I still would like to be comfortable while on the trails. How is the noise and heat levels with the Raptor liner?
Jamescad04
NAXJA Forum User
- Location
- Charlotte, North Carolina
I haven't done the raptor liner yet its on the list of things to do. I have the kit just have been busy with the other things first but I have a feeling it will be coming soon.
Where in NC did you go play in the mud? It must have been recently because we haven't had rain for over a month.
Where in NC did you go play in the mud? It must have been recently because we haven't had rain for over a month.
logdrmer
NAXJA Forum User
- Location
- Winston Salem, NC
Did you guys scrape out the heat shielding? I would assume so, but thought I would ask.
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
I lined mine. The transmission tunnel does get hot. April likes it... It makes for a nice heater in the winter on her side. It doesn't bother me since I don't DD it. I trashed the heatshield.
WrenchedXJ
NAXJA Forum User
- Location
- Fuquay Varina, NC
Soup bowl out at Uwharrie. This happened first thing saturday morning, the rest of the day was spent driving to Troy to hose out the radiator and getting a new air filter. Got back, and stuck to the rocks. Now, I get to spend the next week cleaning mud. :doh: Note to self: Dont let your buddies talk you into a mud hole with the doors off.
Thought: Anybody hear of anybody or using it themselves the heat reduce coating for metal roofs?
Last edited:
Jamescad04
NAXJA Forum User
- Location
- Charlotte, North Carolina
Heres the jeep gutted with no prepwork!
Heres the Jeep done!
Heres a closeup!
I had tons left over I did about 4 coats and some extra to do a couple of coats here!
I used raptor liner so far so good the installation was a lot quicker then when I used herculiner on my truck. Now we just have to see if the Raptor liner is as tuff as the herculiner.
Heres the Jeep done!
Heres a closeup!
I had tons left over I did about 4 coats and some extra to do a couple of coats here!
I used raptor liner so far so good the installation was a lot quicker then when I used herculiner on my truck. Now we just have to see if the Raptor liner is as tuff as the herculiner.
- Location
- Charlotte NC
Well now we need to do it to mine. Because this is sexy.
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
Do the whole Jeep!
thechief86
NAXJA Forum User
- Location
- White House, TN
my buddy has a 74ish bronco, and did the whole thing with raptorliner. it's bah-dass for sure! might not be long till i'm doing the same to my xj....
