aparke4
NAXJA Forum User
- Location
- Atlanta, Ga
great jeep: reason for sale - build a more road worth xj
will trade for stock xj - 98,99 hp 30 4x4 leather interior - less than 100k
99 jeep xj
98,xxx on body, motor, tranny
aw4 tranny - fresh fluid change 2k mi ago
np231J t case - only 35k on it (from a newer wrecked tj) with PORC SYE installed 5k ago
customer rear driveshaft with double cardon
stock front driveshaft extended 2 3 inches with DOM sleeved - no vibes until 80 mph with front driveshaft in - will go 80 without front driveshaft
4.0 I6 242
stock crossmember with one nutsert loose - tack welded until i fix which can be done before sale
dana 30 front - detroit luchbox locker, 4.56 gear, stock inner shaft, alloy usa passenger outer, stock driver outer - have driver alloy usa to install and 2 new 760x u joints - brakes serviced 7k ago - stop great lotta pad life left - synthetic gear oil - superlift diff cover
rear dana 44 from xj - avalanche engin. truss with link brackets, drums, 4.56 gear, detroit locker, synthetic gear lube, superlift diff cover - small leak at fill plug - will fix before sale (teflon tape has come off) stock 30 spline shafts
bolt pattern - 5 on 4.5 15x8 steel rock rims with 35x15x12.50 BFG mud terrains with 90 percent tread left
have matching spare with 95 % tread left - all tires still have nubs on em
custom cage rear - all 1.75 DOM with tire carrier (swingout) with unibody tie ins
rustys rear tube bumper with receiver hitch tied in to cage
chopped rear quarter panels
4 doors off a wrecked 97 - manual crank with tinted glass
B pillar - rustys roll bar B pillar with seat belt tie ins to unibody b billar
custom front dash pillars with spreaders - 1/4 steel on dash huggers and 1.75 DOM for front cage
custom tube fenders - to be done if sold
rustys stinger front bumper tied in to tube fenders
front cowl spreader
aftermarket parts and suspension:
RE 4.5 leaves in rear with 1.5 block - pro comp 1.5 lift shackles
skyjacker 8 inch coils
RK long arm from a grand cherokee lowers with daystar uppers to make a Y link design
RE braided brake lines
omix-ada rugged ridge steering HD set up
stock steering box tapped for 1/2 bolts for extra strength
drop pitman arm
RE track bar
jet stage 1 chip
k and n filter fipk intake
banks header
1 inch tb spacer - smooth bore
bored tb to 60mm
magna flow cat
flowmaster muffler 40 series with 2.5 pipe from stock downpipe to exit
always used k and n oil filter and castrol syntec 10w30 oil
MORE bomb proof motor mounts
custom LED lights in rear
panasonic mp3/ dvd headunit (a 500 dollat unit) with flipdown screen - needs power hooked up and works great
jenson 6.5 front speakers
alpine 6.5 rear speakers
4 point harnesses with APC racing seats
herculined interior
hi lift jack
rear YJ seat needs installed
optima red top battery
3 core HD radiator
rock it parts hi flow therm housing
hood vents
overall the jeep is great - not pretty in some aspecs but needs so TLC - the running gear is awesome and the motor is flawless - comsetically it needs some help and thats about it - i was about to paint in all black so for now it is a mix of colors
pics to come later here are a few old ones
oh skid row tcase skid - 2 pro comp 55 driving lights and 2 european made light housing w. silverstar bulbs tied in to factory lights
old pics
will trade for stock xj - 98,99 hp 30 4x4 leather interior - less than 100k
99 jeep xj
98,xxx on body, motor, tranny
aw4 tranny - fresh fluid change 2k mi ago
np231J t case - only 35k on it (from a newer wrecked tj) with PORC SYE installed 5k ago
customer rear driveshaft with double cardon
stock front driveshaft extended 2 3 inches with DOM sleeved - no vibes until 80 mph with front driveshaft in - will go 80 without front driveshaft
4.0 I6 242
stock crossmember with one nutsert loose - tack welded until i fix which can be done before sale
dana 30 front - detroit luchbox locker, 4.56 gear, stock inner shaft, alloy usa passenger outer, stock driver outer - have driver alloy usa to install and 2 new 760x u joints - brakes serviced 7k ago - stop great lotta pad life left - synthetic gear oil - superlift diff cover
rear dana 44 from xj - avalanche engin. truss with link brackets, drums, 4.56 gear, detroit locker, synthetic gear lube, superlift diff cover - small leak at fill plug - will fix before sale (teflon tape has come off) stock 30 spline shafts
bolt pattern - 5 on 4.5 15x8 steel rock rims with 35x15x12.50 BFG mud terrains with 90 percent tread left
have matching spare with 95 % tread left - all tires still have nubs on em
custom cage rear - all 1.75 DOM with tire carrier (swingout) with unibody tie ins
rustys rear tube bumper with receiver hitch tied in to cage
chopped rear quarter panels
4 doors off a wrecked 97 - manual crank with tinted glass
B pillar - rustys roll bar B pillar with seat belt tie ins to unibody b billar
custom front dash pillars with spreaders - 1/4 steel on dash huggers and 1.75 DOM for front cage
custom tube fenders - to be done if sold
rustys stinger front bumper tied in to tube fenders
front cowl spreader
aftermarket parts and suspension:
RE 4.5 leaves in rear with 1.5 block - pro comp 1.5 lift shackles
skyjacker 8 inch coils
RK long arm from a grand cherokee lowers with daystar uppers to make a Y link design
RE braided brake lines
omix-ada rugged ridge steering HD set up
stock steering box tapped for 1/2 bolts for extra strength
drop pitman arm
RE track bar
jet stage 1 chip
k and n filter fipk intake
banks header
1 inch tb spacer - smooth bore
bored tb to 60mm
magna flow cat
flowmaster muffler 40 series with 2.5 pipe from stock downpipe to exit
always used k and n oil filter and castrol syntec 10w30 oil
MORE bomb proof motor mounts
custom LED lights in rear
panasonic mp3/ dvd headunit (a 500 dollat unit) with flipdown screen - needs power hooked up and works great
jenson 6.5 front speakers
alpine 6.5 rear speakers
4 point harnesses with APC racing seats
herculined interior
hi lift jack
rear YJ seat needs installed
optima red top battery
3 core HD radiator
rock it parts hi flow therm housing
hood vents
overall the jeep is great - not pretty in some aspecs but needs so TLC - the running gear is awesome and the motor is flawless - comsetically it needs some help and thats about it - i was about to paint in all black so for now it is a mix of colors
pics to come later here are a few old ones
oh skid row tcase skid - 2 pro comp 55 driving lights and 2 european made light housing w. silverstar bulbs tied in to factory lights
old pics
Last edited:
