Secshunate
NAXJA Forum User
- Location
- Duncan BC Canada
I am having a hell of a time wiring my power door locks to my alarm. I cannot get them to lock. All my wiring is correct as per the instructions wich are vehicle specific.
I hope somebody can help
2001 XJ Sport
According to my instructions:
In idle state the door lock wires produce voltage, which makes sense since they are to be grounded but:
The alarm is a CRIMESTOPPER CS-2012
It has two universal wires to control the doors:
Do I need a grounding relay here?
Or am I doing something wrong?
Is ther another wire from the switch?
I hope somebody can help
2001 XJ Sport
According to my instructions:
- The ORANGE/PURPLE wire is to be GROUNDED to lock the door
- The PINK/PURPLE wire is to be GROUNDED to unlock the door
In idle state the door lock wires produce voltage, which makes sense since they are to be grounded but:
- The ORANGE/PURPLE only produces 5+v
- The PINK/PURPLE produces 12+v
The alarm is a CRIMESTOPPER CS-2012
It has two universal wires to control the doors:
- GREEN provides GROUND when locking and 12+ POWER when unlocking
- BLUE Provides GROUND when unlocking and 12+ POWER when locking
- When ORANGE/PURPLE is connected to GREEN - nothing happens when either button on remote pressed
- When PINK/PURPLE is connected to BLUE - the doors will unlock when the disarm button is pressed
Do I need a grounding relay here?
Or am I doing something wrong?
Is ther another wire from the switch?