Colorado B/S Thread
- Thread starter in4aride
- Start date
skycrawler
NAXJA Forum User
- Location
- Delta
Re: The Colorado BS thread
what does everyone use to build templates with for there plasma cutter.
I have several items of each desighn ill be cutting out of 3/16 and taking them to a CNC table will be to costly.
what does everyone use to build templates with for there plasma cutter.
I have several items of each desighn ill be cutting out of 3/16 and taking them to a CNC table will be to costly.
time2getdirty
my cats breath smells
- Location
- Cheyenne, Wyoming
Re: The Colorado BS thread
1/8"
1/8"
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
Re: The Colorado BS thread
I use stenciling board, its pretty durable stuff a little thicker than a manila folder. I then trace it onto the plate with a sharpie and cut out the pieces. For long straight cuts I'll use a piece of angle iron or flat stock clamped to the sheet as a guide for the torch.
I use stenciling board, its pretty durable stuff a little thicker than a manila folder. I then trace it onto the plate with a sharpie and cut out the pieces. For long straight cuts I'll use a piece of angle iron or flat stock clamped to the sheet as a guide for the torch.
- Location
- Thornton, CO
eflores
NAXJA Forum User
- Location
- Greg's place
Re: The Colorado BS thread
Aston much?
Aston much?
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Re: The Colorado BS thread
Nope, the Aston is a much better looking car.
Even Ford wishes it were Aston Martin.........
Nope, the Aston is a much better looking car.
Even Ford wishes it were Aston Martin.........
Last edited:
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
Re: The Colorado BS thread
Considering Ford owns a major portion of Aston Martin I think it's safe to say that they're not copying anything, just utilizing their resources.
Considering Ford owns a major portion of Aston Martin I think it's safe to say that they're not copying anything, just utilizing their resources.
- Location
- Thornton, CO
Re: The Colorado BS thread
I'm sure that's how the Aston designer engineers see it as well.
I'm sure that's how the Aston designer engineers see it as well.
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
Re: The Colorado BS thread
Well if British car manufacturers had been able to run their business effectively and not had so many issues with poor quality and lack of profit then maybe those designers wouldn't be subject to Ford taking what they want out of their designs or BMW profiting from their iconic hatchback.
Same reason Jeep engineers can't bitch about what Fiat makes them do, if Jeep had ran their shite correctly they wouldn't be under their control in the first place.
Well if British car manufacturers had been able to run their business effectively and not had so many issues with poor quality and lack of profit then maybe those designers wouldn't be subject to Ford taking what they want out of their designs or BMW profiting from their iconic hatchback.
Same reason Jeep engineers can't bitch about what Fiat makes them do, if Jeep had ran their shite correctly they wouldn't be under their control in the first place.
Re: The Colorado BS thread
Took this lil hot mess out for a date.
If you ever go to Vegas Id totally recommend TBones chophouse at RedRock. Cool little place and some stellar food. This is what was left of my pork chop when I decided I couldn't eat anymore. Was bigger than both my fists together.
Gooooood stuff.
Took this lil hot mess out for a date.
If you ever go to Vegas Id totally recommend TBones chophouse at RedRock. Cool little place and some stellar food. This is what was left of my pork chop when I decided I couldn't eat anymore. Was bigger than both my fists together.
Gooooood stuff.
Re: The Colorado BS thread
Having gotten to drive the Ecoboost AWD fusion recently. I will tell you its a suuuuper nice car and for not a ton of coin either.
Having gotten to drive the Ecoboost AWD fusion recently. I will tell you its a suuuuper nice car and for not a ton of coin either.
UnlimitedMatt
NAXJA Forum User
- Location
- Cheyenne, Wyoming
Re: The Colorado BS thread
Mike, you are truly living the dream. That is one sexy pork chop. Lol
Mike, you are truly living the dream. That is one sexy pork chop. Lol
collkid
NAXJA Forum User
- Location
- Highlands Ranch, Colorado
The Colorado BS thread
Dirty.
Dirty.
Re: The Colorado BS thread
If I bring another chick along wheeling this Summer I'm thinking I'm going to equip the XJ with a Plexiglass divider and a bench seat no seatbelt on the pasasenger side and a suspension seat and harness on the driver side of the plexiglass ,and see if the chick laughs or runs .
If I bring another chick along wheeling this Summer I'm thinking I'm going to equip the XJ with a Plexiglass divider and a bench seat no seatbelt on the pasasenger side and a suspension seat and harness on the driver side of the plexiglass ,and see if the chick laughs or runs .
mechbullxj
NAXJA Forum User
- Location
- Colorado
Re: The Colorado BS thread
picture icon click sans photobucket?
Ship Ahoy. Ejecto Seat?
picture icon click sans photobucket?
Last edited:
