clutch problem

[crook17]

ok so i was driving and went to turn arond and my jeep wouldnt go into any gear other than 4th,at a stop, reverse was grinding and it just wouldnt go.. iafter a while i turned it off and realized to put it in gear when not running it worked... some help?

btw its a 92 and has 452,000 km on it.. original clutch...

 

[Johnnie Walker]

Probably time to change the clutch. You can try bleeding the clutch cylinder. Check the linkage, etc.
When it is in gear, clutch depressed and you start it, what happens?

 

[crook17]

nothing it starts as it should

 

[winterbeater]

Clutch is not releasing all the way. Check fluid level in clutch master cylinder. Might be able to add some fluid to get it to work for a little while, but it's either leaking at the slave or master.

 

[joe_peters]

btw its a 92 and has 452,000 km on it.. original clutch...

280,000 miles on the original clutch?

Replace the clutch, MC and Slave.

 

[crook17]

well nothing is leakin on the firewall and there is not puddles under it.. and yea i guess so? if 452,000 km converts to 280,000 miles haha