• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

CLEAN '98 XJ Limited -

woodkrawler

NAXJA Forum User
Location
Charlotte, NC
I'm thinking about selling the XJ to buy a larger SUV/Truck for a bit more room. I purchased the Jeep from a good friend earlier this year as a mostly stock Jeep. Jeep was sold new by a North Point Chrysler Jeep in Winston-Salem, NC and spent all it's life in the south so there is NO rust on it. Jeep is in really NICE condition for it's age, runs great, A/C blows ICE cold and it will cruise nicely on the hwy at 70mph with no vibes. I can send a full updated spec sheet as well as more pictures to anyone if interested via PM or email.

The currently has 136,xxx miles on it and ALL aftermarket parts are less than 6 months old.

Exterior:
4.0L, AW4 Auto, NP242 w/SYE
HP Dana 30 frt, 29 spline 8.25 rr w/ZJ Discs, raise shock mounts
NEW ZJ V8 Moog Steering, Tie Rod and Drag Link
4.5" Lift w/new leafs, shackles, 4.5" coils, LCAs, Adj Trac-Bar, Sway bar disconnects
'99 Intake Manifold, APN Header, Carsound Cat, Flowmaster Muffler all fully welded
5 New 265/75r16 Falken Rocky Mtn ATS tires on Jeep 16" UltraStar wheels
Rola Vortex Cargo Basket with extension
Hella 500s on front bumper

Interior
VERY CLEAN -
Wet Okole seat covers ft/rr
Husky Liners ft to back including cargo area
Pioneer Headunit
MTX Replacement 5.25" speakers, stock Infinity Amp and Tweeters

Price is $6500.00

All specs and build can be seen here:

http://www.jeepforum.com/forum/f22/back-saddle-98-xj-overland-build-1233829/
 
Here's a listing of the service work/new parts I've performed on the Jeep since purchasing it in April:

K&N Airfilter
New Omix-Ada Neutral Safety Switch
Plugs/Wires/Cap/Rotor/Coil
Silverstar Headlights/Foglights
Oil/Filter - Castrol 10w30, Mopar M-090 Filter
Oil Filter Adapter Seal
Flush/Bleed Brakes
Drain and Fill Tcase
Drain and Fill Differentials
New PCV/CCV Elbows and Grommets
Brute Force U-Joints in Front Axle Shafts
New Unit Bearings both sides
Coolant Flush
Stant 195* Tstat, New Tstat housing
Upper/Lower Radiator Hoses
Water Pump - Duralast
Moog ZJ V8 Steering/TREs
ZJ Rear Disc Rotors and Pads
Bosch o2 Sensors ft/rr
New Headliner

Modifications I've made to the Jeep since April:

Wet Okole Seat Covers ft/rr
MTX 5.25 Speakers ft/rr
Pioneer Headunit w/USB and AUX input
Pulled all Carpets and Steam Cleaned
Husky Liner Floor Mats added front to back including cargo area
99+ Roof Rack Rails (lower profile)
Rola Vortex Rack w/Extension
Monroe Sensatrac Shocks 37029/37120
Homebrew XJ BPE ft/rr
OME Steering Stabilizer
RC 4.5" Coils
RC Adjustable Tbar
RC Sway Bar Discos
RC Lower Control Arms
Pro-Comp 53111 Rear Leafs
Daystar 1" Lift Shackles
Hella's on Front Bumper
Dirtbound Offroad SYE
Chrysler 8.25 Rear Axle
ZJ Rear Disc Brakes
Raise rear shock mounts
5 - 16x7 Jeep Ultra Star wheels
5 - 265/75r16 Falken Rocky Mtn ATS
00-01 Limited Chrome Grille
RC Extended Rear Brake Line
'99-01 XJ Intake Manifold
APN Header, Carsound Cat, Flowmaster Muffler
Fully welded exhaust

Jeep also came from the factory with the UpCountry Package so it has front, tcase, and gas tank skid plates as well as tow hooks up front and towing package with external tranny cooler and Mopar hitch.

The only "needs" that should be addressed over the next few months are the rear main seal (will drip a quarter/silver dollar size drop on floor), ebrake cables hooked up, tranny drained and filled with new filter. I have all the parts to fix these that will go with the Jeep, I just don't have the time to do it right now with a 4 month old at home.
 
If my son weren't overseas right now I would have him go up to look at the Jeep; he is in the market for one. Unfortunately he will not be back for another couple months...
 
Back
Top