8Mud
NAXJA Forum User
- Location
- Central Germany
I work a bit with air and other pressurized gases and liquids. Don´t know how much pressure those pumps will produce, don´t know, if they have a built in pressure fuse. Two pressure relief valves, a pressure relief valve and a pressure switch, a pressure relief valve and a pressure fuse, even if you have to install a T fitting. At even relatively low pressures, hose, lines and tanks can go off like a bomb. At least two seperate ways to shut off/relieve the pressure. A flake of rust/paint/anti-corrosive coating, in the wrong orifice and relief valves and/or pressure switches don´t work. Don´t trust a pressure switch, to control the pressure, I´ve replaced hundreds. Run away compressors are not uncommon.
Was standing next to guy that lost an eye with 60 PSI. Tank was rated at 4-5 times that.
Was standing next to guy that lost an eye with 60 PSI. Tank was rated at 4-5 times that.
Last edited: