Can 31s fit on a stock jeep?
- Thread starter JCS JP
- Start date
- Location
- Richardson, TX
Trimmage
Ba-Riedo
has frame envy
- Location
- redmond/bellingham, wa
That just looks strange...
-Alex
-Alex
Steve_Moore
NAXJA Forum User
- Location
- Missouri
Yea they fit, but if you flex it at all I would say you'd rub the fenders, even trimmed the little bit you did. I trimmed more, put a 3" RC lift on it and it still will rub. I've sice bumpstopped it so it won't quite hit, but I'm pretty sure you would.
camarors8992
NAXJA Forum User
- Location
- Liverpool, New York
Yep.
OverTheHillsATTW
NAXJA Forum User
- Location
- Pennsylvania
Yes they will fit. They also look awesome on many stock xj's. Turning will suck.
mikedashg
NAXJA Forum User
- Location
- San Diego, CA
Ya'll just need to cut more. I cut like half the width from up front. I'm running 35's on the same lift 32's fit.
I cut up to the body line. and several inches (about half the width) in the rear. Same for the front.
Before trimming, the tire wouldn't even fit.
I cut up to the body line. and several inches (about half the width) in the rear. Same for the front.
Before trimming, the tire wouldn't even fit.
- Location
- Lafayette, CA
Ya'll just need to cut more. I cut like half the width from up front. I'm running 35's on the same lift 32's fit.
I cut up to the body line. and several inches (about half the width) in the rear. Same for the front.
Before trimming, the tire wouldn't even fit.
Are you saying thats a 3'' RC lift? That looks more like 5''.
Thats what she said.....:banghead:
besthaticouldo
NAXJA Forum User
- Location
- St Louis, Missouri
that looks way bigger then my re 3.5
Crabapple
NAXJA Forum User
- Location
- Greensboro, North Carolina
31s look ridiculous with no lift.
pb_beaker
NAXJA Forum User
- Location
- in a van down by the river
i think they look good
asp
NAXJA Forum User
- Location
- Westport, MA
i did it for a few months with just trimmage. rubbed a bit but oh well.
bigalpha
Moderator
- Location
- Tucson, AZ
I've got 31s on my 4.5" lift.
OverTheHillsATTW
NAXJA Forum User
- Location
- Pennsylvania
I think a 31" tire is perfect for the Jeep XJ.
adventurr
NAXJA Forum User
- Location
- Queen Creek, AZ
I have 31s on my wagoneer (XJ). They fit with out chopping/ cutting You can ajust your streering by either replacing the stops with a longer bolt and nut combo or just adjusting the stop it self. Till no more rubbing. You might want to change the speedo gear to match the tire size. So your speedo reads right.
- Location
- Richardson, TX
Just to see what it'd look it. Looks like I'll stick to 30s.
And yes, they rubbed.
And yes, they rubbed.
