call me dumb but i dont know...

[Cupcake]

well almost 6 years ago my dad bought a lift for my '91 XJ well since i have gotten it i have wanted to raise it more he says there is a 3 inch lift in it but doesnt seem like it to me... what i am asking u guys if you could identify some aftermarket suspension parts i have on it cuz i want to save as much money as i can here are some pics (btw i bought the pro comp shocks and the lift was bought from 4 wheel parts but they have no record of it since it was so long ago)

 

[Skullver]

they look like rubicon express springs and control arms in front but cant tell from that angle

 

[Cupcake]

please any help is needed and if need more pics please let me know i will take more

 

[Skullver]

a side picture of the control arms would help, I am pretty sure the springs are rubicon express

 

[olympic4x4tech]

thats a complete procomp lift no RE parts on there at all. you can tell by the red urathane bushings for the control arms and you most likely have a very stiff ride because of the high spring rate they run on their coils unloaded your coil is about 19 " if it is a procomp. Also can see the cra##y trac bar drop on the axle side.

 

[Cupcake]

would i be better off just buying a complete kit from RE or piecing on together if i wanted the 3.5 superflex full leaf packs

 

[langer1]

would i be better off just buying a complete kit from RE or piecing on together if i wanted the 3.5 superflex full leaf packs

I don't think you would be gainning much either way

 

[ECKSJAY]

I don't think you would be gainning much either way

Poppycock. I'd swap it out for an RE 3.5" and some OME or Bilstein shocks. Will be a NIGHT and DAY difference between the two lifts. ProCrap components are bottom of the barrel and are stiff as hell.

 

[ruggedjeep]

Go with a full RE kit, get rid of all that procrap junk. Whether 3.5 or 4.5 is up to, you'll be happy with both of them.

 

[olympic4x4tech]

step up to the RE4.5 or 5.5" while your doing the work then sell the procomp stuff some some rich kit that thinks his xj is a desert racer and wont know the difference. might want to check out central 4wd for some good prices

 

[spyder47]

i'd be careful goin over 3.5 your talkin a new drive shaft potentially i have a np242 TC and the RE 3.5 super flex kit and the rear drive shaft is so short it is nearly bottoming out (~2-3") and that is the driveshaft knuckles bottoming out. That is kind close for my comfort. Love the kit can't be happier so i definitely reccommend it.