Blower motor plug

[iluv83vettes]

99 4.0

I *mostly finished my heater core replacement last night and when I went to test it all out and refill the coolant, I noticed the blower motor wasn't working.

All I can guess is when I was putting the heater box back in the dash, I caught the wire on something and pulled it out or I just didn't have it fully connected before putting the heater box back in.

I tested the plug with a voltmeter and it still has power.

I was having a hell of a time plugging the connector in to the blower motor last night with it all installed.

Am I going to have to pull the dash and heater box again to get a good angle on the plug or is it possible to get the plug exactly where it needs to be on the blower motor?

 

[iluv83vettes]

After fighting for almost an hour and realizing that the plug was different than the part I got from rock auto, I just made jumper wires.

 

[bmxdude151]

Im having the same problem but the plug fits just not when the motor is installed. Has anyone else had this problem?

 

[iluv83vettes]

I didn't try to plug it in before putting everything back together. For what it's worth, I haven't had any problems running the jumper wires.