POSrenix
NAXJA Forum User
- Location
- simi valley
I just bought a junkyard ax15 installed it to find 3-4 no good pulled it apart to find out had a broken shift fork and 3rd gear teeth stript and coupler gear and syncro in similar disarray bought new parts reassembled seems to shift with case apart but hard to gauge as im doing it with a prybar when assembled with shifter all gears shift smooth like butter in and out except 4th have to slam and does not feel like fully engages i have pulled case apart several times now to check used correct syncros followed fsm check all tolerances i also know this trans was apart before as it had red rtv silicone has anyone ran into similar situation and if so what fid you do to fix