jeeperjohn
NAXJA Forum User
- Location
- Temecula, CA
Will that increase in pressure be likely to blow any seals or is it all contained in the valve body?The mods have been made, the data logger has been purchased, and the first valve body is being sent out for testing shortly.
We are expecting this preliminary setup to increase line pressure from approx 60psi at idle and 90 psi at WOT to 90 psi at idle to 140psi at WOT. In short, we are expecting a 30-50 psi step up in overall transmission line pressure. This is an overall increase of 52%, (+/- 2.5%) in line pressure.
Shift from 1st to 2nd is calculated to be approximately 56.25% quicker.
Shift from 2nd to 3rd is calculated to be approximately 44.00% quicker.
Shift from 3rd to 4th is calculated to be approximately 77.77% quicker.
Cooling and torque converter flow circuits are not affected.