6t8amxetc
NAXJA Forum User
- Location
- Bothell WA
So this is probably a bit different for you Jeeper's. I have an older AMC Hornet (1977) carbureted car that I have installed an 93' AW4 in to.
I thought the TPS mounting to the carb and throttle valve cable were going to be the hard part. Well the wiring seems to be giving me the biggest problem.
I had the all the plugs for trans and TCU. Made a small wiring harness and have checked things over quite a few times. Still no proper electronic control.
I somehow get approx 5 volts on the TPS ground wire coming out of the TCU. I have 3 different TCU's that all check out the same way.
Anyway possibly looking for someone local that may be interested in helping out. Can offer some cash for help but the whole car is not worth spending a ton of money on. Besides that I have a 95 XJ 2wd sitting right beside it that is going to donate the whole AW4/4.0 in the future anyway.
Any advice/leads appreciated. Thanks...Ty
I thought the TPS mounting to the carb and throttle valve cable were going to be the hard part. Well the wiring seems to be giving me the biggest problem.
I had the all the plugs for trans and TCU. Made a small wiring harness and have checked things over quite a few times. Still no proper electronic control.
I somehow get approx 5 volts on the TPS ground wire coming out of the TCU. I have 3 different TCU's that all check out the same way.
Anyway possibly looking for someone local that may be interested in helping out. Can offer some cash for help but the whole car is not worth spending a ton of money on. Besides that I have a 95 XJ 2wd sitting right beside it that is going to donate the whole AW4/4.0 in the future anyway.
Any advice/leads appreciated. Thanks...Ty