whatevah
It's Yellah!
- Location
- Wilmington, DE
I searched, but couldn't come up with anything...
I've got an annoying grinding/grating/rattle noise from somewhere in the front end between 5-15 mph. It happens braking and accelerating, in gear and/or neutral. It produces a vibration, too. It gets worse if I turn the steering wheel a couple degrees to either side, and almost goes away if I turn the wheel further. The sound seems to be coming from the drivers side, but... So far, I've replaced the rotors, pads, both hubs and the drivers side ujoint and it hasn't changed. You can hear the noise outside the Jeep, too... which makes me do those annoying ricer weaves approaching redlights if I see that somebody has an open window. *sigh*
I don't know what to try next. I guess I'll try replacing the passenger side ujoint, but it seems to be coming from the drivers side. The pass side seemed fine, I did a movement check when I replaced the brakes, and then the hubs 2 weeks later. Only had binding issues from the drivers ujoint. I'm getting tired of pulling axle shafts.
Any worthwile suggestions would be greatly appreciated, this is driving me crazy.
I've got an annoying grinding/grating/rattle noise from somewhere in the front end between 5-15 mph. It happens braking and accelerating, in gear and/or neutral. It produces a vibration, too. It gets worse if I turn the steering wheel a couple degrees to either side, and almost goes away if I turn the wheel further. The sound seems to be coming from the drivers side, but... So far, I've replaced the rotors, pads, both hubs and the drivers side ujoint and it hasn't changed. You can hear the noise outside the Jeep, too... which makes me do those annoying ricer weaves approaching redlights if I see that somebody has an open window. *sigh*
I don't know what to try next. I guess I'll try replacing the passenger side ujoint, but it seems to be coming from the drivers side. The pass side seemed fine, I did a movement check when I replaced the brakes, and then the hubs 2 weeks later. Only had binding issues from the drivers ujoint. I'm getting tired of pulling axle shafts.
Any worthwile suggestions would be greatly appreciated, this is driving me crazy.
Last edited: