I'm having an issue on my '98... soft to medium clunk while trying to start, battery is a week old, starter is 3 months old. All cables have been replaced with 0 gauge welding cable with ends soldered in place and bolted to the battery terminals. The terminals were reworked last week when putting the battery in.
I have IPFs on it, a computer inside it, an inverter, cb, amp, and an LCD screen. ALL are activated on switched 12, but the battery has been drained without switched 12 being on.
I have heard of the ignition switch not fully disengaging, but cannot find that information again. So, does anyone know the base current draw from the battery on a 98 when it is just sitting there doing nothing? Any other ideas would be helpful as well....
I have IPFs on it, a computer inside it, an inverter, cb, amp, and an LCD screen. ALL are activated on switched 12, but the battery has been drained without switched 12 being on.
I have heard of the ignition switch not fully disengaging, but cannot find that information again. So, does anyone know the base current draw from the battery on a 98 when it is just sitting there doing nothing? Any other ideas would be helpful as well....