Just picked up a 98 Cherokee a few weeks ago and the check engine light came on with codes for the transmission. The only thing that has changed since it has came on is the TC doesn't lock up. Sometimes the check engine light will shut off and the TC starts to lock up again. Can anyone tell me what wires i should check for power to the solenoids before i just replace them?
The codes are:
P0700 Transmission Control system
(MIL REQUEST)
P0753 1-2/ 4-5 solenoid circuit
P0740 TCC Out OF Range
P0743 TCC Solenoid Circuit
I did find this in the wiring harness ill try to get a better picture not sure if these have to do anything with the trans maybe they are a ground for the solenoid im not sure the tranny dip stick rubbed through http://www.jeepforum.com/forum/atta...66869t-98-cherokee-transmission-codes-dfv.jpg
Any help will be aprecciated
The codes are:
P0700 Transmission Control system
(MIL REQUEST)
P0753 1-2/ 4-5 solenoid circuit
P0740 TCC Out OF Range
P0743 TCC Solenoid Circuit
I did find this in the wiring harness ill try to get a better picture not sure if these have to do anything with the trans maybe they are a ground for the solenoid im not sure the tranny dip stick rubbed through http://www.jeepforum.com/forum/atta...66869t-98-cherokee-transmission-codes-dfv.jpg
Any help will be aprecciated
Last edited: