95 Steering Column Shroud

[MikeU]

I hope this not to dumb a question but how does the steering column shroud come off on the 95 XJ. There is one torx screw in the middle on the bottom and two holes but I can not tell what it takes to seperate the two halves of the shroud.
Thanks
MikeU

 

[Wayne Sihler]

Should be 2 screws.one each in the recessed holes .i guess that the center screw drops the bottom off,the outers let the top come off.
Wayne

 

[MikeU]

Are the screws in the recessed holes torx screws or philips?

 

[Wayne Sihler]

Are the screws in the recessed holes torx screws or philips?

Torx,IIRC same as the middle.
Wayne

 

[GodSpeed]

I just had mine off today...al three must come off and yes they are all the same size torx....


Peace..........................BartG

 

[Chancer]

IIRC, you have to remove the ignition barrel by turning it to start and then pushing in a clip. Buggered if i know where to find it though.

 

[Matthew Currie]

IIRC, you have to remove the ignition barrel by turning it to start and then pushing in a clip. Buggered if i know where to find it though.

Not on the 95. Those 3 screws should do the trick.