89xj for sale 3100$

[morgan320i]

i got transfered to work and my truck is not cutting it on gas 400$ a month for gas and i need to buy a commuter,

first off
__________
you smog- the cat is new all the vacum lines are new tps and iAC valve,
i have not tryed to smog it
registration expired this month
crack in the window
Transmission is acting funny, previous owner did the first gear lockout, and you have to switch it manually to get to second gear , works great offroad,
---------
lots of goodies
,
6.5 inches of lift
short arms with drop brackets,
rears are springs with blocks,
shock reloacator brackets in rear,
TONS OF FLEXX
35x12.5x15 mtz
gas tank skid and trans skid,
3.55 gearing
29 spline, 8.25 rear with lsd and all new brakes,
abs was removed and BRAND NEw master/booster were installed,
locked front, d30
gutted int,
nice front and rear bumpers, and custom roof rack and rear gas tank swing out, and custom plywood sleeper
-
i had the head rebuilt baked decked , new lifters and pushrods, new HG the quality one, new valve cover gasket , the GOOD one,
, aluminum rad with 3 electric fans,
one should be replaced though ,

lots and lots im forgetting about

 

[CAJJ93XJ]

hate to say that things worth about $2000 on a good day... good luck with sale

 

[morgan320i]

Price is flexible , but its worth more then 2k , tires are 70-80% i spent 250$ on the head work 150 in headparts and injector o rings, 55$ hg 45$ vc gasket , 350$ in brake parts everything from the cylinders to hardware is new, 150$ in aux fans new interstate bat, all new 4g wiring from the starter/grounds, 300$ in steel for the roofrack and swing out 80$ can new fanbelt/ gold filters, orings and gaskets on filter, the list goes on

 

[morgan320i]

New waterpump and thermostat also

 

[morgan320i]

 

[CAJJ93XJ]

Price is flexible , but its worth more then 2k , tires are 70-80% i spent 250$ on the head work 150 in headparts and injector o rings, 55$ hg 45$ vc gasket , 350$ in brake parts everything from the cylinders to hardware is new, 150$ in aux fans new interstate bat, all new 4g wiring from the starter/grounds, 300$ in steel for the roofrack and swing out 80$ can new fanbelt/ gold filters, orings and gaskets on filter, the list goes on

that's money you usually never see again. stock steering, stock axles, lift blocks, short arms, not smogged.. I'm seeing a $1500 jeep here man. like I said hope you get some good offers and all that. just letting you know what to expect

 

[morgan320i]

I know the lost value on things, i see stock jeeps for 1500$ expecting 2500$ for one with 3k worth of parts is not expecting my money back, knowing u never get what you list something for

 

[morgan320i]

Stock rear is a d35 the 29 spline is from a 97+ i will prob smog it iv replaced everything to smog it, 2 inch rear blocks it has shackles and leafs... It got another 4 inches somewhere...

 

[morgan320i]

Short arms have drop brackets,
Stock short arms wont flex like this

 

[CAJJ93XJ]

it's just lift coils blocks and shocks! where did the $3k in parts come from haha. you still have a stock track bar. it pretty much is a stock jeep just taller with oversized tires



ha sorry for arguing it's just cracking me up. I'll be quiet

 

[sneakyjap96]

Yes the you smog part drops it way down if you smog it an pay the reg I could see you possibly getting 2200 for it.. the only reason people pay more for stockers is the same reason I paided 2 k for mine is its unmolested an know its not beat .. hope you don't take our comments the wrong way just words of advice for an 89 doesn't look terrible tho good luck on the sell to bad you couldn't keep it an wheel it

 

[morgan320i]

You were not rude sneaky ,

 

[morgan320i]

The parts i listed were close to 1600$, front and rear bumpers are 4-500$ thats 2k steelies are around 55-60 each before tax and tires are 280$ each,
gas tank skid 200$+ trans skid 100$ rear shock relocat bracket 160$, thats over 3k without the lift being conservitive, if you dont like it , thats fine but your talking shit just to talk shit

it's just lift coils blocks and shocks! where did the $3k in parts come from haha. you still have a stock track bar. it pretty much is a stock jeep just taller with oversized tires



ha sorry for arguing it's just cracking me up. I'll be quiet

 

[Spearfisher XJ]

Looks like a fun rig to me! Good luck with the sale bud.

-Blake

 

[MaxxXJ]

If you paid $300 for steel for that roof rack you got royally raped, I built my 4'x6' for $25 in square tube and like $35 for expanded metal and $10 in paint...

 

[morgan320i]

no....... 13$ per 20 feet i used almost 80 feet up top i bought 1/4 flat stock also, used 3x2x.25 square tubing in the rear, the hinge, another 20 feet on rear jerry holder plus flat stock, i painted it with 4 cans of spray liner not rustolium paint, its 20$ a can, also the stainless hardware i mounted,
where are you buying steel where you can get 80+ feet for 25$ il make the drive, cause i already go to stockon to save money cause its twice as much locally

 

[morgan320i]

35$ expanded metal lol good deal on that one, 70$ here is the cheapest by far for 12g,
also mig wire and i used 2 tank fulls of gas on both projects thats almost 100$ for 2 fills

 

[MaxxXJ]

Geez, That's expensive, I used 2 1 lb spools $12 each of flux core no gas on a 120v wire feed. 3/4x3/4x.0625 was $21 for 70 feet of material, and I got the cheapest expanded metal I could get. And my 55 cuft nitrogen bottle cost $15 dollars for a refill... I know stargold is different but can't be $50 a bottle

 

[MaxxXJ]

Nice rack by all means but Oakley is a lot more expensive than Bakersfield!
This is what I built

Mounted it to the rain gutters

 

[morgan320i]

75/25 blend is 46$ a fillup x2 , after that i went to a bigger tank cause i was spending 2 much on fillups