89 Stater plate

[hotrod76car]

I would like to know if any one knows what position it should be in it has 2 if any one has a picture pleas post Oh it is a 4.0

thanks

 

[8Mud]

http://www.alternatorparts.com/cs130_sbpage1.htm

What is a stater plate? Alternator stater?

 

[hotrod76car]

I should be more spucific I am looking for the stater plat or pick up that is in the distributorused to puls the injecters on the rite stroke it has two positions it can be in I would like to know witch one
thanks

 

[8Mud]

The rotating part, the trigger wheel or the pickup?

 

[langer1]

That is called the cam position sensor.

 

[hotrod76car]

the pick up part that has one screw on a bracket mine has 2 holes to adjust it like 30 degres or so just woundering if mine is in the rite hole

 

[hotrod76car]

I was just going with what the book called it and I spelled it rong it is stator in the service manual

 

[8Mud]

The black plastic pickup in the bottom of the distributor is sitting at the 4 O,clock position looking down and using the wires going in as 12:00 O,clock. The rotating part on top has two scew holes, but two different size raised oval tits, so the rotoating wheel goes on only one way.
There is only one raised screw hole (in my distributor an 87) in the bottom of the distributor and a small metal bar from the screw hole to the right raised pin (looking down), on the pick up assembly.
The center of the black pickup is almost exactly halfway between 3 and 6 in the firing order, on the distributor cap.
Make any sense? Sorry I took so long had to go look.

 

[langer1]

This should help

 

[8Mud]

Your picture sure makes a lot more sense than my explanation :laugh3: I´m gonna have to learn how to do that. A picture is worth a thousand words.

 

[hotrod76car]

Thanks that is the one that I am looking for