5 " lift

[crazy4mopar]

Hi Guys
Do I need a SYE if I go that high? The RE web site says " the installation of a slip yoke eliminator and CV driveshaft on the stock NV231 transfer case is recommended." I have a 242 transfer case, Does it make a differance :?:
I have the 3 1/2 Super flex in it now. I want to put the 1 1/2" shackles and coil spacers up front

 

[ChuckD]

You know there is a tech forum around here somewhere. :roll:

Here it is,

http://www.naxja.org/bbs/tech.cgi

I know at times we need to post tech messages every now and then, but this forum is mainly for chapter buisness.

 

[Stoney]

um depends on if ur going to wheel it or not! if ur not jsut put the t-case drop on if u are put the SYE on! and the t-case doesn't matter they have an SYE for the 242. i have one.

stoney

 

[WesternXJ]

I didn't have to go to the SYE until I went over 6". HTH.

 

[ChuckD]

I guess I can't win this one.


No problems with mine with Re 1462 and Daystar Ext shackle. 5.5-6"

MT, 1" TC drop, Ext slip yoke, OEM DS, D35 rear. Right now my shocks limit my flex a bit. So after I relocate the rear shock mounts I'll let you know if the DS falls out. I have a longer DS waiting to be shortened.

 

[Stoney]

[quote:6e376cce52="SactoXJ"]I didn't have to go to the SYE until I went over 6". HTH.[/quote:6e376cce52]


MY point exactly!!!!!!!!!!!!!! :lol: :lol:

stoney

 

[crazy4mopar]

Well, it looks like I'll try it without the SYE first.